Abstract:The present work proposes to investigate the effect of an ultrahigh molecular weight silicone rubber (UHMW-SR) and two ethylene methyl acrylate copolymers (EMA) with different methyl acrylate (MA) content on the mechanical and fire performance of a fireproof acrylonitrile butadiene styrene copolymer (ABS) composite, with an optimum amount of ammonium polyphosphate (APP) and aluminum diethyl phosphinate (AlPi). ABS formulations with a global flame retardant weight content of 20 wt.% (ABS P) were melt-compounded, with and without EMA and UHMW-SR, in a Brabender mixer. During this batch process, ABS P formulations with UHMW-SR and/or EMA registered lower torque values than those of ABS P. By means of scanning electron microscopy (SEM), it was possible to observe that all ABS composites exhibited a homogenous structure without phase separation or particle agglomeration. Slightly improved interfacial interaction between the well-dispersed flame-retardant particles in the presence of EMA and/or UHMW-SR was also noticed. Furthermore, synergies in mechanical properties by adding both EMA and UHMW-SR into ABS P were ascertained. An enhancement of molecular mobility that contributed to the softening of ABS P was observed under dynamic mechanical thermal analysis (DMTA). An improvement of its flexibility, ductility and toughness were also registered under three-point-bending trials, and even more remarkable synergies were noticed in Charpy notched impact strength. Particularly, a 212% increase was achieved when 5 wt.% of EMA with 29 wt.% of MA and 2 wt.% of UHMW-SR in ABS P (ABS E29 S P) were added. Thermogravimetric analysis (TGA) showed that the presence of EMA copolymers in ABS P formulations did not interfere with its thermal decomposition, whereas UHMW-SR presence decreased its thermal stability at the beginning of the decomposition. Although the addition of EMA or UHMW-SR, as well as the combination of both in ABS P increased the pHRR in cone calorimetry, UL 94 V-0 classification was maintained for all flame-retarded ABS composites. In addition, through SEM analysis of cone calorimetry sample residue, a more cohesive surface char layer, with Si-O-C network formation confirmed by Fourier transform infrared (FTIR), was shown in ABS P formulations with UHMW-SR.

Flame‐retardant Polycarbonate/acrylonitrile‐butadiene‐styrene Based on Red Phosphorus Encapsulated by Polysiloxane: Flame Retardance, Thermal Stability, and Water Resistance

Mechanical Properties and Thermal Degradation of Flame Retardant PC/HDPE Blending with Spirocyclic Hydroxybenzene Phosphate

A Novel Flame-Retardant Acrylonitrile-Butadiene-Styrene System Based on Aluminum Isobutylphosphinate and Red Phosphorus: Flame Retardance, Thermal Degradation and Pyrolysis Behavior

Effect of Phosphorus Compounds on Flame Retardancy and Thermal Degradation of Polycarbonate and Acrylonitrile–Butadiene–Styrene

Preparation and Characterization of Microcapsulated Red Phosphorus and Its Flame‐retardant Mechanism in Halogen‐free Flame Retardant Polyolefins

Preparation, Characterization, and Performance of Lignin-based Microencapsulated Red Phosphorus Flame Retardant for ABS

Acrylonitrile–Butadiene–Styrene Terpolymer with Metal Hypophosphites: Flame Retardance and Mechanism Research

Highly Efficient Phosphazene-Derivative-Based Flame Retardant with Comprehensive and Enhanced Fire Safety and Mechanical Performance for Polycarbonate

Phosphorus-Based Flame-Retardant Acrylonitrile Butadiene Styrene Copolymer with Enhanced Mechanical Properties by Combining Ultrahigh Molecular Weight Silicone Rubber and Ethylene Methyl Acrylate Copolymer

Fire-safe and Mechanically Robust Polycarbonate Composite Enabled by Novel Copolymerization/macromolecular Blending Strategy

Polycarbonate–acrylonitrile-butadiene-styrene Blends with Simultaneously Improved Compatibility and Flame Retardancy

Preparation of Microcapsulated Red Phosphorus Coated with Melamine-Formaldehyde Resin/Zinc Borate and Its Applications in Flame Retardant Polyolefins

Synthesis of Polymeric Flame Retardants Containing Phosphorus‐nitrogen‐bromide and Their Application in Acrylonitrile‐butadiene‐styrene

Preparation of microencapsulated red phosphorus and its flame-retardant application in PP composites

Study on the Flame Retardant and Mechanical Properties of HDPE/MRP Blends

Study on Application of Microencapsulated Red Phosphorus Flame Retardant in LDPE Compound

A novel macromolecular phosphorus-nitrogen containing flame retardant for polycarbonate

Preparation of Microencapsulated Red Phosphorus and Its Flame-Retardance for Polyurethane Rigid Foam

Rubber-based Phosphaphenanthrene Grafted Polymer and Its Application to Fabricate Flame Retardant Polycarbonate Blend with Satisfied Comprehensive Mechanical Properties

Synthesis and Characterization of a Novel Flame Retardant and its Application in Polycarbonate

Compounding Flame Retardancy of Triphenyl Phosphate and Alpha Zirconium Phosphate for Polycarbonate/Acrylonitrile-Butadiene-Styrene Blends