Abstract:The present work proposes to investigate the effect of an ultrahigh molecular weight silicone rubber (UHMW-SR) and two ethylene methyl acrylate copolymers (EMA) with different methyl acrylate (MA) content on the mechanical and fire performance of a fireproof acrylonitrile butadiene styrene copolymer (ABS) composite, with an optimum amount of ammonium polyphosphate (APP) and aluminum diethyl phosphinate (AlPi). ABS formulations with a global flame retardant weight content of 20 wt.% (ABS P) were melt-compounded, with and without EMA and UHMW-SR, in a Brabender mixer. During this batch process, ABS P formulations with UHMW-SR and/or EMA registered lower torque values than those of ABS P. By means of scanning electron microscopy (SEM), it was possible to observe that all ABS composites exhibited a homogenous structure without phase separation or particle agglomeration. Slightly improved interfacial interaction between the well-dispersed flame-retardant particles in the presence of EMA and/or UHMW-SR was also noticed. Furthermore, synergies in mechanical properties by adding both EMA and UHMW-SR into ABS P were ascertained. An enhancement of molecular mobility that contributed to the softening of ABS P was observed under dynamic mechanical thermal analysis (DMTA). An improvement of its flexibility, ductility and toughness were also registered under three-point-bending trials, and even more remarkable synergies were noticed in Charpy notched impact strength. Particularly, a 212% increase was achieved when 5 wt.% of EMA with 29 wt.% of MA and 2 wt.% of UHMW-SR in ABS P (ABS E29 S P) were added. Thermogravimetric analysis (TGA) showed that the presence of EMA copolymers in ABS P formulations did not interfere with its thermal decomposition, whereas UHMW-SR presence decreased its thermal stability at the beginning of the decomposition. Although the addition of EMA or UHMW-SR, as well as the combination of both in ABS P increased the pHRR in cone calorimetry, UL 94 V-0 classification was maintained for all flame-retarded ABS composites. In addition, through SEM analysis of cone calorimetry sample residue, a more cohesive surface char layer, with Si-O-C network formation confirmed by Fourier transform infrared (FTIR), was shown in ABS P formulations with UHMW-SR.

Preparation, Characterization, and Performance of Lignin-based Microencapsulated Red Phosphorus Flame Retardant for ABS

A Novel Flame-Retardant Acrylonitrile-Butadiene-Styrene System Based on Aluminum Isobutylphosphinate and Red Phosphorus: Flame Retardance, Thermal Degradation and Pyrolysis Behavior

Acrylonitrile–Butadiene–Styrene Terpolymer with Metal Hypophosphites: Flame Retardance and Mechanism Research

Synthesis and Characterization of Aromatic Diphosphates and Investigation of Flame Retardancy in ABS

Valorization of Industrial Lignin as Biobased Carbon Source in Fire Retardant System for Polyamide 11 Blends

Preparation of microencapsulated red phosphorus and its flame-retardant application in PP composites

Synthesis and Application of Phosphorus Flame Retardant Hdp Abs Composites

Effects of a Phosphorus Flame Retardant System on the Mechanical and Fire Behavior of Microcellular ABS

Thermal, Crystalline and Mechanical Properties of Flame Retarded Poly(lactic Acid) with a PBO-like Small Molecule - Phenylphosphonic Bis(2-aminobenzothiazole)

Preparation of a reactive flame retardant by functional modification of lignin and its application in phenolic foam

Two‐step Fabrication of Lignin‐based Flame Retardant for Enhancing the Thermal and Fire Retardancy Properties of Epoxy Resin Composites

Flame‐retardant Polycarbonate/acrylonitrile‐butadiene‐styrene Based on Red Phosphorus Encapsulated by Polysiloxane: Flame Retardance, Thermal Stability, and Water Resistance

Preparation of Microencapsulated Red Phosphorus Through Melamine Cyanurate Self-Assembly and Its Performance in Flame Retardant Polyamide 6

Lignin‐based nitrogen and phosphorus‐containing polylactic acid with flame‐retardant performances

Synthesis of New Flame Retardant from Enzymatic Hydrolyzed Lignin and Its Flame Retardant Property

Preparation of Microcapsulated Red Phosphorus Coated with Melamine-Formaldehyde Resin/Zinc Borate and Its Applications in Flame Retardant Polyolefins

A halogen-free flame-retardant ABS system and its flame retardancy

Preparation of a Biobased Core‐shell Flame Retardant and Its Application in Polylactic Acid

Phosphorus-Based Flame-Retardant Acrylonitrile Butadiene Styrene Copolymer with Enhanced Mechanical Properties by Combining Ultrahigh Molecular Weight Silicone Rubber and Ethylene Methyl Acrylate Copolymer

Synthesis and Application of Synergistic Azo-Boron-bpa / Polydopamine As Efficient Flame Retardant for Poly(lactic Acid)

Bio-Based Alkali Lignin Cooperative Systems for Improving the Flame Retardant and Mechanical Properties of Rigid Polyurethane Foam