Abstract:By having a challenging prospect of developing more environmentally friendly flame-retardant (FR) acrylonitrile-butadiene-styrene (ABS) formulations, an initial study related to the effect of combining ammonium polyphosphate (APP) with cork powder (C), a bio-waste of the cork industry on ABS-FR thermal stability and fire performance is proposed and discussed in the present work. ABS composites with a global filler weight content of 30 wt.% were prepared by using a melt-compounding process. Two different types of thermal decomposition behavior, assessed by means of thermogravimetric analysis (TGA), were observed for ABS/C/APP composites. For formulations with C/APP weight ratio < 1, the thermal decomposition of APP polyphosphate network was shifted to lower temperature. On the other hand, when C/APP ratio was ≥ 1, a new thermal decomposition (TD) step related to an earlier thermal decomposition of cork components was registered between 320°C and 370°C. Moreover, by means of Fourier-transform infrared spectroscopy (FTIR) analysis of the pyrolysis gasses, a broader temperature range of ammonia and water release was noticed when APP and C were simultaneously incorporated in ABS. In addition, a micro-scale combustion calorimeter (MCC) analysis revealed that replacing APP by cork led to a decrease of the heat release capacity (HRC) and an increase of the residue formation compared to when only APP was present in ABS composite. Furthermore, forced flaming fire characterization of ABS formulations, studied by means of cone calorimetry (CC), revealed that replacing 20 wt.% of APP by cork (ABS/20C/10APP) led to a similar fire performance to the ABS formulation with 30 wt.% of APP (ABS/30APP). A similar trend under horizontal UL-94 was observed, nevertheless, for the composite with cork in its composition no dripping was noticed. Additionally, by only replacing a 3 wt.% of APP (ABS/3C/27APP) by cork an optimum improvement in fire retardancy was achieved, with the highest efficiency in reducing the peak heat release rate (pHRR) of 21% regarding ABS/30APP. These results have been related to the chemical interaction between APP and cork components in the condensed phase confirmed by the observance of a more intense P-O-C absorbance peak of the CC residue of ABS/3C/27APP, analyzed by means of FTIR. This composite also showed a more cohesive and expanded char layer, observed by scanning electron microscopy (SEM), which acted as a more efficient protective barrier, reducing heat and mass transfer phenomena during combustion which also led to the highest reduction in linear burning rate (LBR) under horizontal UL-94.

Acrylonitrile–Butadiene–Styrene Terpolymer with Metal Hypophosphites: Flame Retardance and Mechanism Research

Improving the flame retardancy and mechanical properties of high-density polyethylene-g-maleic anhydride with a novel organic metal phosphonate

Development of Halogen‐Free Flame Retardant Acrylonitrile Butadiene Styrene (ABS) Based Composite Materials

Phosphorus-Based Flame-Retardant Acrylonitrile Butadiene Styrene Copolymer with Enhanced Mechanical Properties by Combining Ultrahigh Molecular Weight Silicone Rubber and Ethylene Methyl Acrylate Copolymer

Effects of a Phosphorus Flame Retardant System on the Mechanical and Fire Behavior of Microcellular ABS

Compounding Flame Retardancy of Triphenyl Phosphate and Alpha Zirconium Phosphate for Polycarbonate/Acrylonitrile-Butadiene-Styrene Blends

Synergy between piperazine pyrophosphate and aluminum diethylphosphinate in flame retarded acrylonitrile-butadiene-styrene copolymer

Effect of Epoxy-Functionalization on the Halogen-Free Flame-Retardant Properties of Acrylonitrile-Butadiene-Styrene Resin

Development of a Zr-Based Metal-Organic Framework (UiO-66) for a Cooperative Flame Retardant in the PC/ABS

Phosphorous-phosphorous synergistic effect on flame retardancy, mechanically reinforce and hydrolytic resistance for PC/ABS blends

Thermal Behaviors And Flame Retardancy Of Novel Flame-Retardant, Oil-Filled Styrene-Ethylene-Butadiene-Styrene Block Copolymer-Polypropylene Materials

Study on Flame-retardant PC/ABS Alloy with High-Strength and Heat-resistance

Development of a UiO-66 Based Waterborne Flame-Retardant Coating for PC/ABS Material

Effects of Chlorinated Polyethylene and Antimony Trioxide on Recycled Polyvinyl Chloride/acryl-Butadiene-styrene Blends: Flame Retardancy and Mechanical Properties

Study of using cork powder as an adjuvant bio-flame retardant in acrylonitrile-butadiene-styrene flame retardant formulations

Preparation and Characterization of Flame Retardant Abs/Montmorillonite Nanocomposite

A Novel Branched Phosphorus-Containing Flame Retardant: Synthesis and Its Application into Poly(Butylene Terephthalate)

Enhanced Mechanical, Thermal and Flame Retardant Properties by Combining Graphene Nanosheets and Metal Hydroxide Nanorods for Acrylonitrile–Butadiene–Styrene Copolymer Composite

Flame-retarded polystyrene with phosphorus- and nitrogen-containing oligomer: Preparation and thermal properties

Characterization of compatibilized blends of nylon 66/poly(2,6-dimethyl-1,4-phenylene ether)/high-impact polystyrene filled with phosphinate-based flame retardants: Mechanical property, rheological behavior, and flame retardancy

Effects of Melamine Cyanurate and Aluminum Hypophosphite on the Flame Retardancy of High-Impact Polystyrene