Abstract:In the present study, the melamine-formaldehyde prepolymer (MEP) was first synthesized at pH 8-8.5 under about 80 degrees C with melamine, formaldehyde, triethanolamine and methanol as the starting materials. Subsequently, the microencapsulated red phosphorus (MRP) was successfully prepared by in-situ polymerization at pH 5.5 under 65 degrees C, using MFP and red phosphorus (RP) powders as raw materials, and potassium persulphate (KPS) as catalyst. The obtained products were detected by differential scan calorimetry (DSC), scanning electron microscope (SEM), Fourier transform infrared (FUR) and X-ray photoelectron spectroscopy (XPS). It was found that KPS is useful in enhancing the reaction activity of MFP, which can make RP be well encapsulated by melamine-formaldehyde resin (ME) and reduce the reaction time. The DSC, SEM and XPS results show that it won't get well-encapsulated MRP only under acidic condition and without any KPS. When a proper quantity of K'S is employed, the RP particles can be almost completely-encapsulated by MF and the peak temperature of oxidation reaction for MRP is 480 degrees C, which is much higher than that of RP, extending the applications for MRP. The FTIR spectrum demonstrates that the coating material on the surface of RP accurately is ME, in agreement with the reference. Polyproplene (PP) composites with different formulations were prepared by melt extrusion. It was shown that the flame-retardant efficiencies are very low when the PP composites only contain MRP or MH. However, the flame-retardant property can obviously improve if MRP and MH are both used in the PP composites. When PP : MRP MH=100 (phr) : 15 (phr) : 50 (phr), the limited oxygen index of the MRP/MH/PP composite is 26%, and vertical firing ranks UL-94 V-0. In addition, the possible flame-retardant mechanism of the PP composites has also been discussed, and further verified by FTIR and Raman spectroscopy.

Preparation of Microencapsulated Red Phosphorus and Its Flame-Retardance for Polyurethane Rigid Foam

Preparation of Microcapsulated Red Phosphorus Coated with Melamine-Formaldehyde Resin/Zinc Borate and Its Applications in Flame Retardant Polyolefins

Preparation of microencapsulated red phosphorus and its flame-retardant application in PP composites

Preparation and Characterization of Microcapsulated Red Phosphorus and Its Flame‐retardant Mechanism in Halogen‐free Flame Retardant Polyolefins

Application of Micro Encapsulated Red Phosphorus Retandant in Flexible Polyurethane Foam

Coated Vs. Naked Red Phosphorus: A Comparative Study on Their Fire Retardancy and Smoke Suppression for Rigid Polyurethane Foams

Effect of microencapsulated long‐chain chlorinated paraffin on flame retardant of rigid polyurethane foam

Highly dispersed red phosphorus produced by mechanical milling for enhanced flame retardancy of polyurethane-based foam

A highly efficient melamine/red phosphorus flame retardant for polyurethane‐based foams

Highly-efficient Reinforcement and Flame Retardancy of Rigid Polyurethane Foam with Phosphorus-Containing Additive and Nitrogen-Containing Compound

Flame‐retardant and Mechanical Properties of Rigid Polyurethane Foam/mrp/mg(oh)2/gf/hgb Composites

Influence of thermal behavior of phosphorus compounds on their flame retardant effect in PU rigid foam

Study on the Flame Retardant Properties of Microcapsule Ammonium Polyphosphate Polyurethane Rigid Foam

Preparation of melamine–formaldehyde resin-microencapsulated ammonium polyphosphate and its application in flame retardant rigid polyurethane foam composites

Synthesis, Mechanical Properties and Fire Behaviors of Rigid Polyurethane Foam with A Reactive Flame Retardant Containing Phosphazene and Phosphate

Efficient and economical synthesis of flame retardant rigid polyurethane nanocomposite foam through phosphorus-based compounds and in-situ exfoliated microcrystal muscovite

Preparation of Microencapsulated Red Phosphorus Through Melamine Cyanurate Self-Assembly and Its Performance in Flame Retardant Polyamide 6

Synthesis and Characterization of Flame Retardant Rigid Polyurethane Foam Based on a Reactive Flame Retardant Containing Phosphazene and Cyclophosphonate

Flame Retardancy and Physical Properties of Rigid Polyurethane Foam Containing Phosphorus Flame Retardants

Study on Application of Microencapsulated Red Phosphorus Flame Retardant in LDPE Compound

Preparation of Microencapsulated Red Phosphorus with Phenol-formaldehyde Resin As Shell and Its Flame-Retardant Application in Cable Compound