Abstract:An attempt is made in this study to research the performance of prestressed concrete pipe piles based on 10,333 pile tests. Short and medium-length piles with slenderness ratios ranging from 10 to 90 are most widely used, and the optimal length is between the range of 10~50 m. For the same bearing stratum and diameter, the capacity of pile increases with increasing pile length until a limiting value is achieved. The average pile-top settlement is approximately in the range of 10 ~ 25 mm, and the rebound rates for piles with various lengths are similar. The results show that the diameter of Φ400 and Φ500 is most widely used, accounting for 33.8% and 46.1%, respectively, and the optimal length is between the range of 10 ~ 50 m. Under conditions of, when the bearing stratum is clay, the bearing capacity of pipe piles increases with an increase in length to diameter ratio; when sandy soil, the bearing capacity firstly increases and then decreases; when with the same length to diameter ratio, the bearing capacity increases in both cases, and the latter is higher than the former. There is a large discreteness in settlement of pile top, and the average value is normally about 10 ~ 25 mm, without significant relationship with the bearing stratum. The results of statistical research will be a reliable reference for pipe pile research, design and construction in soft soil area. The results are expected to improve the understanding of prestressed concrete pipe piles and facilitate the design process.

Mechanical Property Analysis Of Four Types Of Concrete Piles

Statistical research on performance of prestressed concrete pipe piles

Model Tests on the Bearing Capacity of Precast Open-Ended Micro Pipe Piles in Soft Soil

Experimental Studies on Precast Prestressed Concrete Pile to Cip Concrete Pile-Cap Connections

Model tests on the bearing capacity of precast oxen-ended micro pipe plies in sort soil

Behavior of Model Steel H-Pile-To-Pile-Cap Connections

Experimental Analysis of Bearing Capacity of Cast-in-place Tubular Pile

Study On Characteristics Comparison Between Rigid Pile In Composite Foundation With Rigid-Flexible Piles And That In Free State

Comparative Experimental Study on Flexural Property of Reinforced and Conventional Phc Pile

Field Behavior of Pre-Stressed High-Strength Concrete Nodular Piles and PHC Pipe Piles Under Compression in Soft Soil Areas

Engineering Character of a New-Style Pretensioned Spun Concrete Nodular Pile

Contrastive Experimental Analysis Of Bearing Behaviors Of Phc Pile And Precast Square Piles

Flexural performances of prestressed high strength concrete piles reinforced with hybrid GFRP and steel bars

Flexural Performances of Pre-Stressed Concrete Piles Reinforced with Hybrid BFRP and Steel Bars

Experimental study on flexural and shearing property of reinforced prestressed concrete pipe pile

Bearing Behaviors of Self-Balanced Pile

Model tests comparing the behavior of pre-bored grouted planted piles and a wished-in-place concrete pile in dense sand

Experimental study on flexural and shear performance of prestressed steel strand ultra-high strength concrete H-type piles

Field Behavior of Driven Prestressed High-Strength Concrete Piles in Sandy Soils

Laboratory tests on the frictional capacity of core pile - cemented soil interface

Influence of Soil Reinforcement on the Uplift Bearing Capacity of a Pre-Stressed High-Strength Concrete Pile Embedded in Clayey Soil