Abstract:In this study, we introduced micro-optical surface formation via femtosecond (fs) laser pulse scanning to chalcogenide polymer (ChP), a promising material for costeffective infrared applications. Employing this method, we successfully fabricated a large-area poly(sulfur-random-(1,3-diisopropenylbenzene)) (S-r-DIB) r-DIB) microlens array (MLA) component. Each micro-concave spherical surface was crafted with a single fs laser pulse, serving as a micro-concave lens surface. We achieved a quasi- periodic MLA sample with over 2 x 105 5 micro-lenslets within a 10 mm x 10 mm footprint. Additionally, precise locating of laser pulse irradiation enabled us to create a hexagonal MLA with a filling factor over 37 %. Morphological investigations and imaging tests confirmed the adequate surface quality of the fabricated components, with its uniformity revealed by the virtual foci grid in near infrared region. To elucidate the forming conditions and mechanisms, we studied the evolution of surface morphology under various laser irradiation conditions. Laser induced damage thresholds of S70-r-DIB30 70- r-DIB 30 were experimentally determined for both 800 nm and 400 nm wavelengths under single- and multi-pulse irradiation scenarios. We identified the optimal fabrication fluence window as 115-205 mJ/cm2 2 with 800 nm single-pulse irradiation. The bandgap of the S70-r-DIB30 70- r-DIB 30 was estimated as 2.06 eV, and energy band analysis confirmed distinctions in ablation morphology. Furthermore, we investigated sub-surface morphology evolution using orthogonal ultrafast pump-probe imaging, revealing diversity compared to traditional inorganic and polymeric optical materials due to differing absorption and etching mechanisms. The elastic wave velocity of 3.2 km/s in this ChP and etching velocity of 0.7 mu m/pulse were experimentally determined. These findings deepen our understanding of ChP material interaction with fs lasers, offering insights for potential applications such as surface engineering, substrate cutting, and micro-structure formation.

Formation of Polymer Micro-Bump with Laser Rear-Side Irradiation and Sacrificial Layer

Toward On-Chip Unidirectional and Single-Mode Polymer Microlaser

Study of Negative Side Wall Surface Roughness by Picosecond Photonic Impact Microdeposition

Micro-Fabrication and Monitoring of Three-Dimensional Microstructures Based on Laser-Induced Thermoplastic Formation

Fabrication of Microstructures by Rear-Side Picosecond Laser Irradiation of Two-Layer PMMA

Micro- and Nanofabrication Using Bessel-beam Activated Photopolymerization

3D Microstructure Manufacture Based on Laser-Induced Thermoplastic Expansion

Fabrication of three-dimensional microstructures based on 1064 nm laser-induced thermoplastic expansion

Fabrication of microstructures by picosecond laser

Nanobump Arrays Fabricated by Laser Irradiation of Polystyrene Particle Layers on Silicon

Ultrafast Large Area Micropattern Generation in Non-absorbing Polymer Thin-Films by Pulsed Laser Diffraction

Preparation of high-quality three-dimensional microstructures on polymethyl methacrylate surfaces by femtosecond laser micromachining and thermal-induced micro-leveling

Polymerization-Induced Growth of Microprotuberance on the Photocuring Coating.

Micro-punching process based on spallation delamination induced by laser driven-flyer

Effect of laser fluence on sacrificial layer morphology in laser rear-side ablation of film

Manufacturing of Functional Polymer Micro- and Nano-Structures by Femtosecond Laser Pulse

Controllable Formation of Nanogaps in Thin Metallic Film by Rear Side Irradiation with Ultrashort Pulsed Laser

Preparation of Highly Stable Polymer Microstructure with Enhanced Adhesion Strength by Pushpin-like Nano/Microstructure Array

Laser-assisted surface processing for functionalization of polymers on micro- and nano-scale

Facile Fabrication of Functional PDMS Surfaces with Tunable Wettablity and High Adhesive Force Via Femtosecond Laser Textured Templating

Infrared Microlens Formation on Chalcogenide Polymer Surface Via Femtosecond Laser Pulse Ablation