Abstract:Recently, carbon nanotube field-effect transistors (CNTFETs) have garnered significant attention from VLSI engineers due to their exceptional electrical properties. This paper proposes a novel high-speed, low-power eight-transistor (8 T) static random-access memory (SRAM) cell based on 32-nm CNTFET technology. The SRAM cell was simulated using the HSPICE tool with a V DD of 0.9 V. The high-speed and low-power characteristics of the SRAM design are attributed to the high subthreshold slope and high carrier mobility of metal-oxide-semiconductor field-effect transistor (MOSFET)-like CNTFETs utilized in the simulations. The implementation of dual threshold transistors, coupled with a transmission gate for bitline access, contributes to the enhanced performance. Key performance metrics such as noise margins, power consumption, delay, and SRAM electrical quality metric (SEQM) of the proposed SRAM have been evaluated and compared with existing CNTFET-based SRAM designs. The proposed cell demonstrates reductions of 73.73%, 43.18%, and 58.70% in read power, write power, and hold power, respectively, compared to the lowest respective power values of other examined SRAM designs. The proposed SRAM ranks second, third, and second in write static noise margin (WSNM), hold static noise margin (HSNM), and read static noise margin (RSNM), respectively, among other designs. Additionally, the proposed SRAM exhibits the least sensitivity to parametric variations compared to other designs. The SEQM, which provides a comprehensive assessment of access times, noise margins, and power usage for the SRAM cell, has been calculated. The SEQM of the proposed SRAM is 10.6, 1.89, 13.15, and 1.82 times higher than that of C6T, BLP8T, Mani's 10 T, and LP8T, respectively.

A New 6-Transistor SRAM Cell for Low Power Cache Design

A New SRAM Cell Design for Nano-Scale Technology

Analyzing the Performance of 6T SRAM Cell and 64×64 Memory Array at Lower Technology Nodes for Low Power Design

A Novel 6-T SRAM Cell Design with High Reliability and Low Power

Design and Implement of Low Power Consumption SRAM Based on Single Port Sense Amplifier in 65 Nm

Dynamic Power Reduction in a Novel CMOS 5T-SRAM for Low-Power SoC

A Low-Power Small-Area 6T SRAM Cell for Tracking Detector Applications

A novel low power 64-kb SRAM using bit-lines charge-recycling and non-uniform cell scheme

A Highly Reliable and Low-Power Cross-Coupled 18T SRAM Cell

A 65-nm Reliable 6T CMOS SRAM Cell with Minimum Size Transistors

A 0.33 V 2.5 Μw Cross-Point Data-Aware Write Structure, Read-Half-select Disturb-Free Sub-Threshold SRAM in 130 Nm CMOS

Highly Area-Efficient Low-Power SRAM Cell with 2 Transistors and 2 Resistors

Half-Select Disturb-Free 10T Tunnel FET SRAM Cell with Improved Noise Margin and Low Power Consumption

A Low-Energy, Stable, Single-Bitline Accessed FinFET 9T-SRAM

Charge recycling 8T SRAM design for low voltage robust operation

A FinFET based low-power write enhanced SRAM cell with improved stability

Novel 15T SRAM Cell for Low Voltage High Reliability Application

Performance Analysis of 6T and 9T SRAM

Reverse Bias Current Eliminated, Read-Separated, and Write-Enhanced Tunnel FET SRAM

Design analysis of a low-power, high-speed 8 T SRAM cell using dual-threshold CNTFETs

Proposal of a FET-LET Hybrid 6T SRAM