Abstract:Transactions of the Institute of Measurement and Control, Ahead of Print. The engine slipping start (ESS) benefits parallel hybrid electric vehicles from stable ignition and emission reduction. However, inappropriate coordination between the traction motor torque and clutch slipping torque during the ESS will lead to poor smoothness of the vehicle and failed start of the engine. Uncertainty in clutch slipping torque and change in driver demand torque bring tough challenges with sluggish convergence and intensive vehicle jerk in practice. To deal with this problem, a novel two-layer model reference adaptive controller (MRAC) which contains two parallel reference models is proposed to improve robustness and convergence rate simultaneously. On one hand, uncertainties of clutch slipping torque are divided into a low-frequency part and a high-frequency part, and adaptive laws based on the output feedback are designed contrapuntally to enhance robustness. On the other hand, two parallel reference models are designed to accelerate the tracking error convergence rate without changing the reference profiles, which is generated according to the driver demand torque in real time. To test the robustness and convergence rate, the proposed two-layer MRAC is compared with the classical MRAC and proportional–integral controller under the driving scenario with uncertain clutch slipping torque and abrupt change in driver demand torque. The sensitivity with different adaptive gains and low-frequency and high-frequency uncertainties in clutch slipping torque are examined. Finally, hardware-in-the-loop experiments are performed to verify the effectiveness of the proposed two-layer MRAC.

Q-Learning Based Adaptive Pid Controller Design for Amt Clutch Engagement During Start-Up Process

Single neuron adaptive PID control for hydro-viscous drive clutch

Adaptive Optimal Control for Automatic Clutch

Compound Sliding Mode Motion Trajectory Tracking Control of an Electro-Pneumatic Clutch Actuator While Maximizing Its Stiffness

System dynamic modelling and adaptive optimal control for automatic clutch engagement of vehicles

Engagement Control of Automated Clutch for Vehicle Launching Considering the Instantaneous Changes of Driver's Intention

MAP Control of Starting Clutch Based on DMC-PID Cascade Algorithm

AMT Clutch Engagement Position Control Based on DMC-PID Cascade Control Algorithm

Application of Feedback Linearization and Sliding Mode Control to AMT of Vehicles

A Study on the Start Process Simulation of a Dual Clutch Automatic Transmission Based on Fuzzy Control

Optimal control of dry clutch engagement based on the driver's starting intentions

Hierarchical Control of Starting Process for Wet Dual Clutch Transmission Based on Direct-Drive Pump-Controlled Hydraulic Actuator

LQ Control During Clutch Engagement for Automatic Transmissions.

Optimization Control of Wedge Clutch Shifting Performance Based on Gain Self-tuning PID

Model referenced adaptive control to compensate slip-stick transition during clutch engagement

Robust engine slipping start control of hybrid electric vehicles with uncertainty in clutch slipping torque and change in driver demand torque

Wet Dual Clutch Launching Adaptive Control Considering Service Time

Automatic Clutch Control Based on Estimation of Resistance Torque for AMT

Multi-state control strategy of starting for a wet friction clutch via a fuzzy logic algorithm

H∞ Control for Vehicle-Used Automatic Clutches

Two Layer Model Reference Adaptive Control Based on State Feedback for Engine Slipping Start of Parallel Hybrid Electric Vehicles