Abstract:This paper investigates the clutch control problem for automotive transmission systems. This paper focuses on the pressure tracking control for a wet clutch, which has a much shorter stroke and asks for a more precise position and pressure regulation. The system dynamics are highly nonlinear, and the developed model includes unmodeled dynamics and parameter uncertainties. All these factors will influence the closed-loop system performance if not considered carefully during the control design, which makes the control synthesis for clutch systems challenging. Compared with the existing sliding-mode control (SMC) method, an improved method based on nonlinear sliding mode is presented in this paper to further improve the convergence rate and tracking precision of the closed-loop clutch system. This controller ensures that the pressure tracking error not only reaches the sliding manifold in finite time but converges to the equilibrium point in finite time as well. Moreover, considering the chattering phenomenon caused by high switching gains, a composite terminal SMC (TSMC) method based on uncertainty observer is proposed to reduce chattering. Using an extended state observer (ESO) technique, an uncertainty observer is designed for estimating the model uncertainties of pressure dynamics, pressure-reducing-valve flow dynamics, and estimation error of piston displacement. Then, a feedforward compensation term is combined with the terminal-sliding-mode feedback control. Thus, the composite terminal-sliding-mode controller may take smaller control gains for the whole pressure tracking procedure without sacrificing uncertainty compensation performance. Experimental results based on an xPC Target platform of the clutch system are provided to show the superiority of the proposed methods.

LQ Control During Clutch Engagement for Automatic Transmissions.

Improved Clutch Slip Control for Automated Transmissions

Compound Sliding Mode Motion Trajectory Tracking Control of an Electro-Pneumatic Clutch Actuator While Maximizing Its Stiffness

Simultaneous Control of Motion and Maximized Stiffness for an Electro-Pneumatic Clutch Actuator Based on Pressure Observers

Research on the Optimal Control of Working Oil Pressure of DCT Clutch Based on Linear Quadratics Form

Design and Implementation of Clutch Control for Automotive Transmissions Using Terminal-Sliding-Mode Control and Uncertainty Observer

Optimal Gear Shift Control of Two-Speed Dual-Clutch Transmission in Electric Vehicle for Smoothness and Friction Loss Reduction

Clutch Micro-Slip Control in Gearshifts for Dual Clutch Transmission

Vehicle Creep Control Based on Nonlinear Robust Method for Dual-Clutch Transmission.

System dynamic modelling and adaptive optimal control for automatic clutch engagement of vehicles

Engagement Control of Automated Clutch for Vehicle Launching Considering the Instantaneous Changes of Driver's Intention

Model referenced adaptive control to compensate slip-stick transition during clutch engagement

H∞ Control for Vehicle-Used Automatic Clutches

Model Referenced Adaptive Control During Improve Engagement

Clutch Engagement Control Based on Stability Analysis

Optimal control of dry clutch engagement based on the driver's starting intentions

Feedback linearization control for electronically controllable clutch of vehicle

Multi-state control strategy of starting for a wet friction clutch via a fuzzy logic algorithm

A Nonlinear Control for Clutches with Multistage Vibroisolation

Micro-slip Control and Torque Estimation for Dual Clutch Transmission

Research on Feedback Linearization Control of Dual-clutch for Dual Clutch Transmission