Abstract:Many nanoporous Si structures, including those formed by common electrochemical etching procedures, produce a uniformly etched nanoporous surface. If the electrochemical etch rate is slowed down, details of the etch process can be explored and process parameters may be varied to test hypotheses and obtain controlled nanoporous and defect structures. For example, after electrochemical etching of heavily n-doped (R = 0.05-0.5 Omega.cm) silicon (100 single crystals at a current density of 10 mA cm(-2) in buffer oxide etch (BOE) electrolyte solution, defect craters containing textured nanopores were observed to occur in ring-shaped patterns. The defect craters apparently originate at the hydrogen/BOE bubble interface, which forms during hydrogen evolution in the reaction. The slower hydrogen evolution due to low current density and high BOE viscosity allows sufficient bubble residence time so that a high defect density appears at the bubble edges where local reaction rates are highest. Current-carrying Si-OH species are most likely responsible for the widening of the craters. Reducing the defect/doping density in silicon lowers the defect concentration and thereby the density of nanopores. Measurements of photoluminescence lifetime and intensity show a distinct feature when the few nanopores formed at the ring edges are isolated from each other. Overall features observed in the photoluminescence intensity by XPS strongly emphasize the role of surface oxide that influences these properties. Copyright (c) 2005 John Wiley & Sons, Ltd.

Theoretical study on the performance of porous silicon explosion

Model and Numerical Simulation for Adsorption Phase Reaction and Crystallization

The Influence Of Chemical Oxidation On Surface State And Photoluminescence Of Porous Silicon

A Chemical Kinetic Study of the Oxidation of Silane by Nitrous Oxide, Nitric Oxide and Oxygen

Study on Fabrication and Thermal Analysis of Porous Silicon Nanoenergetic Materials

Density Functional Theory Study on the Oxidation of Hydrosilylated Silicon Nanocrystals

Photoluminescence, Composition and Microstructure of Porous Silicon Prepared by Different Substrates

The Influence of Microstructure on Optical Properties of Porous Silicon

Influence of Silicon on the Detonation Performance of Energetic Materials from First-Principles Molecular Dynamics Simulations

Study of Optical Properties of Porous Silicon Produced by Metal-Aid

Potential Hazards of SiH4:N2 Mixture with Lean Oxygen

Preparation of Nanoporous Silicon and Study on Its Properties

Selective Response of Mesoporous Silicon to Adsorbants with Nitro Groups

Microstructure and oxidation of porous silicon

A machine-learning interatomic potential to study dry/wet oxidation process of silicon

EPR Study of Porous Silicon

Surface Orientation and Temperature Effects on the Interaction of Silicon with Water: Molecular Dynamics Simulations Using ReaxFF Reactive Force Field.

Hydrogen Bubbles and Formation of Nanoporous Silicon During Electrochemical Etching

Improving the stability of porous silicon photoluminescence by damp oxidation

IMPROVING THE STABILITY OF POROUS SILICON PHOTOLUMlNESCENCE BY DAMP OXIDATION