Abstract:A combined analytical and experimental approach is presented to characterize mixed-mode fracture of hybrid material bonded interfaces under four-point bending load, and closed-form solutions of compliance and energy release rate (ERR) of the mixed-mode fracture specimens are provided. The transverse shear deformations in each sublayer of bimaterial bonded beams are included by modeling the specimen as individual Timoshenko beams, and the effect of interface crack-tip deformation on the compliance and ERR are taken into account by applying the interface deformable bilayer beam theory (flexible-joint model). The higher accuracy of the present analytical solutions for both the compliance and ERR of mixed-mode fracture specimens is manifested by comparing them with the solutions predicted by the conventional beam theory (CBT) and finite-element analysis (FEA). As an application example, the fracture of wood-fiber-reinforced plastic (FRP) bonded interface is experimentally evaluated by using mixed-mode fracture specimens [i.e., four-point asymmetric end-notched flexure (4-AENF) and four-point mixed-mode bending (4-MMB)], and the corresponding values of critical ERRs are obtained. Comparisons of the compliance rate change and the resulting critical ERR based on the CBT, the present theoretical model, and FEA demonstrate that the crack-tip deformation plays an important role in accurately characterizing the mixed-mode fracture toughness of hybrid material bonded interfaces under four-point bending load. DOI: 10.1061/(ASCE)AS.1943-5525.0000032. (C) 2011 American Society of Civil Engineers.

Study on Delamination Propagation Behavior and Measurement Method for One Kind of New Fiber Metal Laminates

Micro Failure Analysis of Fiber Metal Laminates

Investigation on the Compressive Mechanical Properties of Ultra-Thick CFRP Laminates

Delamination Analysis of Carbon Fiber/Epoxy Composite Laminates under Different Loading Rates Using Acoustic Emission

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

Delamination Behavior of an Advanced Al-Li Alloy Laminate During Fatigue Crack Growth

Deformation and Fracture Mechanisms of Automated Fiber Placement Pre-Preg Laminates under Out-of-plane Tensile Loading

A comprehensive experimental investigation of the rate-dependent interlaminar delamination behaviour of CFRP composites

Characterization Methods of Delamination in a Plain Woven CFRP Composite

Study on Delamination Damage of CFRP Laminates Based on Acoustic Emission and Micro Visualization

Numerical investigation of two-dimensional Mode-II delamination in composite laminates

Study on the delamination behavior of thick composite laminates under low-energy impact

A Study on the Intralaminar Damage and Interlaminar Delamination of Carbon Fiber Composite Laminates under Three-Point Bending Using Acoustic Emission

XFEM Simulation of Delamination in Composite Laminates Part A Applied Science and Manufacturing

Interlaminar fracture toughness analysis of fiber reinforced metal laminates based on APDL

Failures of laminates under nonpenetrative impacts

XFEM Simulation of Delamination in Composite Laminates

A new model characterizing the fatigue delamination growth in DCB laminates with combined effects of fiber bridging and stress ratio

THE STUDY ON TESTS AND NUMERICAL SIMULATION OF CRACK PROPAGATION PROBLEM IN DELAMINATION FAILURE OF COMPOSITE LAMINATED PLATE

Application of a delamination model to laminated composite structures

Interlaminar Fracture Toughness Evaluation in Glass/Epoxy Composites Using Acoustic Emission and Finite Element Methods