Abstract:This article proposes an adaptive all-digital background compensation of timing skew mismatches in time-interleaved analog-to-digital converters (TI-ADCs). The proposed approach uses the orthogonality between the desired component representing ideal samples of the TI-ADC input signal and the timing skew mismatch errors. Our technique is the first attempt to use a source separation mechanism to recover the desired component in the digital output of TI-ADC. A finite impulse response (FIR) filter implementing the Hilbert transform and two separate adaptive FIR (A-FIR) filters are exploited to implement this recovery process. The proposed technique works at frequencies close to the full admissible Nyquist frequency range, and its operation does not depend on the number of sub-ADCs (SADCs). This method operates without any extra SADC. The main cost introduced by the proposed compensation technique is the requirement of two adjustable FIR filters. This cost is proportional to the number of taps in these FIR filters that can be optimized according to the specific application. This technique is validated through various behavioral simulations and a field-programmable-gate-array (FPGA) implementation. With the proposed method, the signal-to-noise and distortion ratio (SNDR) is enhanced from 23.06 to more than 66.82 dB in a 12-bit TI-ADC when the standard deviation of timing skew mismatches is 10% of the TI-ADC's sampling interval.

Mismatch Estimation for Parallel Time-Interleaved Sampling System Based on Subspace Projection

Parallel background calibration with signal-shifted correlation for pipelined ADC

The fast time-interleaved ADC channel mismatch calibration method based on equivalent sampling and dynamic reference point

A Calibration Scheme for a 800-Ms/s 14 Bit Pipelined ADC in 28-Nm CMOS

A Wideband Timing Mismatch Calibration Design for Time-Interleaved Analog-to-Digital Converters with Fast Convergence

Simple Approach to Determining Parameters of Noncommensurate Sampling for Optimal Pseudo-Noise Code Phase Delay Discrimination

A Sinusoidal Reference Signal Based High Accuracy Timing Skew Mismatch Estimation Scheme for Time Interleaved ADC.

A Statistics-Based Background Timing Skew Calibration Algorithm For Time-Interleaved Adcs

TI-ADC multi-channel mismatch estimation and calibration in ultra-high-speed optical signal acquisition system

A Background Timing Skew Calibration Technique In Time-Interleaved Adcs

An All-Digital Background Calibration Technique for M-Channel Downsampling Time-Interleaved ADCs Based on Interpolation

A Novel Autocorrelation-Based Timing Mismatch C Alibration Strategy in Time-Interleaved ADCs

Time interleaved ADCs for high speed high resolution data acquisition system

Time- and Frequency-Interleaving: Distinctions and Connections

An improved wide-range, low-complexity, fully-parallel digital background timing mismatch calibration method for dual-channel TIADC based on perfect reconstruction filter bank

Spectrum distribution‐based blind calibration method of mismatches for time‐interleaved ADCs

Digital Compensation of Timing Skew Mismatches in Time-Interleaved ADCs by Source Separation

Photonic-Assisted Time-Interleaved Adc Based on Optical Delay Line

An All−Digital Timing Mismatch Calibration Algorithm Based on Reference Channel for TIADC

Novel Adaptive Blind Calibration Technique of Time-Skew Mismatches for Any Channel Time-Interleaved Analogue-to-digital Converters

Digital background calibration algorithm and its FPGA implementation for timing mismatch correction of time-interleaved ADC