Improvement of Reliability of Closing Latch in Spring Type Operating Mechanism of High Voltage Circuit Breakers

Li Yu,Xiaohui Xue,Jianhua Wang,Yingsan Geng,Zhiyuan Liu,Shiping Wei,Zhaogui You

DOI: https://doi.org/10.1109/tdc.2012.6281558

2012-01-01

Abstract:Occasionally closing operation failures occurred when a spring type operating mechanism was used to operate a high voltage circuit breaker with higher loads. This kind of failures is a high risk for circuit breakers. The objective of this paper is to propose a concept of reset time difference of a trip-open unit and to improve the reliability of closing operation of a high voltage circuit breaker with a spring type operating mechanism based on the reset time difference. In a spring type operating mechanism, there is a big latch and a small latch in a trip-open latch unit. In a close operation of a high voltage circuit breaker driven by a spring type operating mechanism, there is a time lag between the big latch and the small latch when they reach their final latched positions. And we definite the time lag as the reset time difference (T-R). The experimental results showed that the reliability of closing operation can be guaranteed with T-R was higher than 10ms. And T-R increased with an increase of a preload of the big latch spring. And the bounces of the small latch were the most significant factor to cause a closing operation failure. An improvement from the point of view of time reset difference (T-R) enhanced the reliability of closing operation of a high voltage circuit breaker.