Abstract:The IEC 62271-100 international standard states that the mechanical endurance test is a mandatory test for a circuit breaker (CB) to verify its mechanical performance. The objective of this paper is to demonstrate the failure modes of three mechanical components and to show how they can be improved to extend the mechanical endurance of a prototype 126 kV single-break vacuum circuit breaker (VCB). The three mechanical components are: a pin (stainless steel: 20CrNiMo) contained in a contact spring component, a joint bearing (stainless steel: 1Cr18Ni9Ti), and an inter-locking pawl (steel: Q235). All three components showed low-cycle metallic fatigue failure modes, which presented as deformation and metallic crack initiation and propagation. During mechanical endurance operations (i.e., closing and opening operations under no load conditions), the pin in the contact spring component fractured after approximately 178 operations; the joint bearing deformed greatly and fractured after about 1,500 operations; and the inter-locking pawl fractured after approximately 2,100 operations. Based on the theory of multi-body system dynamics and the S-N characteristics of the metal material applied in each case, the failure modes and fatigue lives of the three failed components and improved versions of their geometries were analyzed, respectively. Both the simulation results and the experimental results for the mechanical endurances of the improved component geometries offered greater confidence in the mechanical reliability of the 126 kV VCB: after 1,500 operations, the improved pin worked well, with no deformation or initial cracking; after 2,000 operations, small deformations were observed on both terminals, but with no initial cracking; and after 2,000 operations, the joint bearing and the inter-locking pawl both continued to work well, with no deformation or initial cracking.

Reliability Analysis of the Closing Spring of High Voltage Circuit Breaker

Improvement of Reliability of Closing Latch in Spring Type Operating Mechanism of High Voltage Circuit Breakers

Mechanical Condition Identification and Prediction of Spring Operating Mechanism of High Voltage Circuit Breaker

Fatigue Life Estimation of Critical Components in a Motor-Energized Spring Operating Mechanism Based on Theory of Reliability

Improvement of Reliability of Closing Latch in Spring Type Operating Mechanism of High Voltage Circuit Breakers by a Reset Time Difference

Fatigue Life Assessment of the Inflective Arm Roller in High-voltage Switch Spring Operating Mechanism

Analyses of Mechanical Characteristics of Vacuum Circuit Breaker During the Closing Process Taking Electrodynamic Force into Account

Relationship Between Displacement Characteristics Of A 126kv Vacuum Circuit Breaker And Spring Type Operating Mechanism

Cushion Process of the Hydraulic Cylinder of Hydraulic Operating Mechanism for High Voltage Circuit Breaker

Characteristic Analysis of High Voltage Circuit Breaker with Hydraulic Operating Mechanism

High voltage circuit breaker dynamics simulation and mechanical state recognition

Research on Mechanical Reliability of a Permanent Magnetic Actuator for a 126kv Vacuum Circuit Breaker

Simulation Study On The Control Valve In Hydraulic Operating Mechanism Of The High Voltage Circuit Breaker

Break Kinetic Energy-based Overload Dynamic Model for a Small Hermetically Sealed Relay

Mechanical Reliability of a 126 Kv Single-Break Vacuum Circuit Breaker

Research on Frequent Pressure Leakage Failure of Hydraulic Spring Mechanism of HMB-8 Circuit Breaker

Analysis of Structure Strength in Medium Voltage DC System High Speed Repulsing Mechanism

Influence of Mechanical Faults on Electrical Resistance in High Voltage Circuit Breaker

Dynamic fault analysis model development for vacuum circuit breaker action

Research on 10kv Quick Vacuum Circuit Breaker with Double Opening and Closing Coils

Study of the Electromagnetic-Dynamics Interaction of the Breaking Process of Low-Voltage Molded Case Circuit Breaker