Abstract:The temperature of hermetically sealed electromagnetic relay (HSER) continues to rise during opening and closing process of contacts under overload condition. Contact is one of the important components of small sealed electromagnetic relays, and its contact characteristics and heating characteristics are closely related to the reliability of the whole relay. During the operation of the relay, there is physical wear between the contacts, after the load is applied, there is also the problem of arc erosion, in the working conditions of overload, the problem of electrical ablation is more serious, which will lead to the deterioration of the contact surface, the contact resistance between the contacts increases, the contact heat increases, affecting the life and reliability of the relay. The DC relay overload test rig was built, the scanned topography of contact surfaces under different load levels was photographed, and the effects of overload on the physical and electrical properties of the contacts were analyzed. By studying the microscopic contact process between the contacts and the effect of surface roughness on the contact resistance, the probability density function of the surface roughness of the contacts is introduced into the mathematical formulation of the contact resistance, and the mathematical model of the contact resistance between the contacts related to the surface roughness is obtained. The contact depth and contact temperature rise of contacts with different surface roughness were simulated by finite element method. The contact system thermal characteristic test system was designed and constructed, and the relay overload temperature rise test was carried out to verify the validity of the calculation model by comparing with the measured results.

Break Kinetic Energy-based Overload Dynamic Model for a Small Hermetically Sealed Relay

Electrical Performance Design for Circuit Breakers Based on Multi-domain Sequential Coupling

Overload Capacity Experimental Research and the Improved Design Method for the Contact System of an SSER

Modeling and Simulation of Hermetically Sealed Electromagnetic Relay under Mechanical Environment.

An Equivalent Heat Source Calculation Model for HSER under Overload Conditions

Mechanical and Electrical Characteristics of the Electromagnetic Relay under Vibration and Shock Environment

Failure Simulation and Analysis Method of Hermetically Sealed Eletromagnetic Relay under Long-term Load

Surge Load Experiment Design and Results Analysis of Relay

Failure Analysis of Power Relays with Multiple Breaks in the Electrical Endurance Experiments

A New Theoretical Model to Study the Closing Bounce Characteristics of the Electromagnetic Relay under Capacitive Loads

Method of Analyzing Vibration Characteristics of Armature System of Hermetically Sealed Electromagnetic Relay

Simulation of spring system's operation process for electromagnetic relay

The Analyzing Method of Limit Vibration Acceleration for the Electromagnetic Relays

Overview on Modeling Method and Experimental Research of Contact Spring Bounce for Electromagnetic Relays

Analysis on Dynamic Characteristics of Ultra-Compact High Power Relay Based on Virtual Prototype Technology

A Novel Nonlinear Dynamic Model for Predicting Contact Bounce of Electromagnetic Relays with Flexible Spring Components

DYNAMIC SIMULATION AND OPTIMUM DESIGN OF LOW-VOLTAGE CIRICUIT BREAKER

Motion Analysis of a Multi-DOF Contact of Vacumnum Relay Based on Dynamics Modelle and Its Load Experiment

Over-current Performance of Movable Springs of a Latched-Type Relay Used in Watt-hour Meters

Dynamic fault analysis model development for vacuum circuit breaker action

Simulation of Arcs for DC Relay Considering Different Impacts