Abstract:A ZW-126/D2000-40 type single-break vacuum circuit breaker (VCB) with controlled switching technology is designed and produced in this paper. The results of type tests based on IEC and GB standards are presented. A 126 kV single-break vacuum interrupter (VI) with 3/4 coil axial magnetic field (AMF) contacts is used in the VCB, which can interrupt short currents of 40 kA. The external insulation of the VI is provided by SF6 at 0.1 MPa. In order to match the 126 kV single-break VI and controlled switching device, a long-stroke electro-magnetic force actuator (EMFA) with 16 kN closing holding force and 3.5 m/s average opening speed is designed. Moreover, a position tracking controlled switching device based on closed-loop control using the technology of a fuzzy control algorithm and pulse width modulation is applied to the controlled switching device. This device is applied to control the coil current of EMFA and the electromagnetic force, so as to control the EMFA to follow the ideal position curve. The type tests of 126 kV VCB are all passed according to the IEC62271-100 and GB1984-2014, including dielectric tests, basic short-circuit tests, short-line fault tests, out-of-phase tests, etc. The strong capacitive current breaking capacity and mechanical strength of the VCB are proved by the capacitive current switching test of class C2, electrical endurance test of class E2 and mechanical endurance test of class M2. The electromagnetic compatibility (EMC) tests are passed according to the IEC61000-4. The controlled switching test of capacitive current was successful according to IEC62271-302 and GB/T30846-2014, and the controlled switching accuracy is less than ± 0.5 ms. The test results show that the VCB has excellent performance, which has broad application prospects in special occasions at a 126 kV voltage level, such as a switching capacitor and no-load transformer, etc.

Research on 10kv Quick Vacuum Circuit Breaker with Double Opening and Closing Coils

A Fast LVDC Vacuum Hybrid Circuit Breaker: Dielectric Recovery and Design Consideration

Experimental Study on Fast Isolating Switch with Vacuum Multi-breaks

A Double-Break Current Injection Vacuum DCCB: Principle and Analysis

Hybrid Mechanical-Static Dc Circuit Breaker And Dc Breaking

Research on Contact Structure in Vacuum Interrupter for DC Breaking Capability

Development and Application of a 10 Kv Mechanical DC Circuit Breaker

Development of High-Voltage Vacuum Circuit Breakers in China

Research on Operating Mechanism for Ultra-Fast 40.5-Kv Vacuum Switches

Fast Operating Moving Coil Actuator for a Vacuum Interrupter

Simulation Study On The Control Valve In Hydraulic Operating Mechanism Of The High Voltage Circuit Breaker

Experimental Investigation Into the Synergy of Vacuum Circuit Breaker With Double-Break

Characteristic Analysis of High Voltage Circuit Breaker with Hydraulic Operating Mechanism

Comprehensive Modeling, Optimization and Experiment of 10 kV/15 kA Forced Resonant DC Circuit Breaker

TDV10 Type Vacuum Circuit Breaker Electromagnetic Operating Mechanism Design

Research on an intelligent operating mechanism of high voltage circuit breaker

Design and Verification of an Ultra-high Voltage Multiple-break Fast Vacuum Circuit Breaker

RESEARCH AND DESIGN OF PERMANENT MAGNETIC ACTUATOR FOR 72.5 kV HV VACUUM CIRCUIT BREAKER

Research and Design of Permanent Magnetic Actuator for High Voltage Vacuum Circuit Breaker

Development and type test of ZW-126/D2000-40 vacuum circuit breaker with controlled switching technology

Researches on 10 kV DC Hybrid Circuit Breaker Based on IGCT Series