Abstract:This article extends the quantitative method of optimizing the opening velocities for a vacuum circuit breaker (VCB) with cup-type axial magnetic field (AMF) contacts. The material of the AMF contact is Cu50Cr50. We define v(1) as the initial opening velocity over half the full contact gap and v(2) as the average velocity over the full contact gap of 20 mm. We optimize v(1) and v(2) using the transition of anode-discharging modes, of which we combine the footpoint mode and anode spot mode into a large-gap high-current (LGHC) mode. The experiment shows that v(1) should be higher than a threshold velocity v(1_th), which corresponds to a peak critical contact gap d(1_ th) for the transitions of an intense arc mode into a diffuse arc mode, in high-current interruption. The higher v(1) is than v(1_th), the faster the intense arc mode evolves into the diffuse arc mode. This helps successfully interrupt the short-circuit current in a short arcing time. Another threshold velocity, v(2_th), corresponds to the maximum critical contact d(II_ th) for the formation of an LGHC mode in the second arc current half-wave. A high v(1) design needs v(2) to be lower than v(2_th). The lower v(2) is than v(2_th), the better the VCB avoids the LGHC mode in high-current interruption. This helps interruption over a long arcing time. We propose an intelligent opening and breaking operation for VCBs with cup-type AMF contacts, whereby the VCB opens with different opening velocities according to the short-circuit current level.

Optimization Scheme of Closing Bouncing for VS1 Vacuum Circuit Breaker

Electrical Performance Design for Circuit Breakers Based on Multi-domain Sequential Coupling

Improvement of Reliability of Closing Latch in Spring Type Operating Mechanism of High Voltage Circuit Breakers by a Reset Time Difference

Optimization Design of Operating Mechanism Cam Profile for a 126 kV Vacuum Circuit Breaker Based on an Optimal Closing Velocity

Improvement of Reliability of Closing Latch in Spring Type Operating Mechanism of High Voltage Circuit Breakers

Optimum Design of the Cam of Spring Operating Mechanism in Vacuum Circuit Breaker

Optimal Design and Dynamic Analysis of a Spring-Actuated Cam-Linkage Mechanism in a Vacuum Circuit Breaker

Analyses of Mechanical Characteristics of Vacuum Circuit Breaker During the Closing Process Taking Electrodynamic Force into Account

Simulation Analysis and Improvement of Anti-Bounce Device Failure on Air Circuit Breaker

Experiment and Simulation Research on Mechanical Characteristic of Vacuum Circuit Breaker

Bounce Analysis and Suppression Method of the Isolating Contact Mechanism

Analysis of Performance Characteristics for Operation Mechanism of Double-Break Moulded Case Circuit Breaker

Intelligent optimization of vacuum circuit breaker closing speed

Optimum Design of High-Voltage Circuit Breakers Based on Mechanism Dynamic Features Simulation

Simulation Study On The Control Valve In Hydraulic Operating Mechanism Of The High Voltage Circuit Breaker

DYNAMIC SIMULATION AND OPTIMUM DESIGN OF LOW-VOLTAGE CIRICUIT BREAKER

Relationship Between Displacement Characteristics Of A 126kv Vacuum Circuit Breaker And Spring Type Operating Mechanism

Simulation Of An Improved Operating Method For Vacuum Circuit Breakers With Permanent Magnetic Actuators

Optimizing the Opening Velocity for a Vacuum Circuit Breaker with Cup-Type Axial Magnetic Field Contacts

Analysis and Optimization of Linkage Transfer Position for the Operating Mechanism of MCCB

Optimization Design on Step-Shape Cushioning for Hydraulic Operating Mechanism of High Voltage Circuit Breakers