Optimizing the Opening Velocity for a Vacuum Circuit Breaker with Cup-Type Axial Magnetic Field Contacts

Xiaofei Yao,Chen Guan,Jianhua Wang,Yingsan Geng,Zhiyuan Liu,Xiaoshe Zhai

DOI: https://doi.org/10.1109/tps.2021.3074167

IF: 1.368

2021-01-01

IEEE Transactions on Plasma Science

Abstract:This article extends the quantitative method of optimizing the opening velocities for a vacuum circuit breaker (VCB) with cup-type axial magnetic field (AMF) contacts. The material of the AMF contact is Cu50Cr50. We define v(1) as the initial opening velocity over half the full contact gap and v(2) as the average velocity over the full contact gap of 20 mm. We optimize v(1) and v(2) using the transition of anode-discharging modes, of which we combine the footpoint mode and anode spot mode into a large-gap high-current (LGHC) mode. The experiment shows that v(1) should be higher than a threshold velocity v(1_th), which corresponds to a peak critical contact gap d(1_ th) for the transitions of an intense arc mode into a diffuse arc mode, in high-current interruption. The higher v(1) is than v(1_th), the faster the intense arc mode evolves into the diffuse arc mode. This helps successfully interrupt the short-circuit current in a short arcing time. Another threshold velocity, v(2_th), corresponds to the maximum critical contact d(II_ th) for the formation of an LGHC mode in the second arc current half-wave. A high v(1) design needs v(2) to be lower than v(2_th). The lower v(2) is than v(2_th), the better the VCB avoids the LGHC mode in high-current interruption. This helps interruption over a long arcing time. We propose an intelligent opening and breaking operation for VCBs with cup-type AMF contacts, whereby the VCB opens with different opening velocities according to the short-circuit current level.