Abstract:In order to investigate the size effect and the sensibility of strain rate of the j ute yarns,the quasi-static tests were conducted by utilizing a C43 electromechanical universal test system and dynamic tests were performed by utilizing a CEAST 9340 drop-weight impact system.The correlations between mechanical parameters (Young’s modulus,tensile strength,ultimate strain and toughness)and experimental conditions (gauge lengths and strain rates)were obtained through the tests.The samples with six different gauge lengths (25,50,100,150,200 and 300 mm)were tested at the strain rate of 1/600 s-1 in the quasi-static tests,and the samples with the gauge length of 25 mm were tested over four different strain rates (40,80,120 and 160 s-1 )in the dynamic tests in which the strain rate was a variable.The experimental results show that Young’s modulus increases initially,and then tends to be stable when the gauge length is larger than 100 mm,while tensile strength,ultimate strain and toughness de-crease with increasing the gauge length.As the strain rate increases,Young’s modulus and tensile strength increase,while ultimate strain decreases initially and then maintains constant,and toughness decreases initially but then increases.Due to the large scatter in the material properties of plant yarns,Weibull distribution was used to fit the experimental data,by which the distribution of tensile strength of the j ute yarns under different experimental conditions (gauge length and strain rate)were obtained.

Strain Rate and Gage Length Effects on Tensile Behavior of Kevlar 49 Single Yarn

The Effects of Gage Length and Strain Rate on Tensile Behavior of Kevlar® 29 Single Filament and Yarn

Experimental Study of Dynamic Behavior of Kevlar 49 Single Yarn

Experimental and Theoretical Study on the Strain Rate and Temperature Dependence of Mechanical Behaviour of Kevlar Fibre

Experimental and Numerical Study of Multi-Scale Tensile Behaviors of Kevlar® 49 Fabric

Dynamic Tensile Testing of Kevlar 49 Fabrics

Mechanical Behaviors of Kevlar 49 Fabric Subjected to Uniaxial, Biaxial Tension and In-Plane Large Shear Deformation

EXPERIMENTAL STUDY ON THE TENSILE MECHANICAL BEHAVIOR OF KEVLAR49 FIBRE BUNDLES UNDER DIFFERENT STRAIN-RATES

Characterization of Mechanical Behavior of Kevlar 49 Fabrics

Tensile properties and constitutive modeling of Kevlar29 fibers: from filaments to bundles

Experimental Study and Modeling of Single Yarn Pull-out Behavior of Kevlar® 49 Fabric

Effects of gauge length and strain rate on tensile behavior of j ute yarns

Tensile Behaviors of Basalt, Carbon, Glass, and Aramid Fabrics under Various Strain Rates

An experimental study on the tensile behavior of Kevlar fiber reinforced aluminum laminates at high strain rates

Effect of Strain Rate on the Mechanical Properties of Carbon/epoxy Composites under Quasi-Static and Dynamic Loadings

Experimental Study of Parameters Affecting the Tensile Mechanical Properties of Glass Fiber Bundle

Tensile Behavior of Carbon Fiber Bundles at Different Strain Rates

Effect of Strain Rate on the Transverse Tension and Compression Behavior of a Unidirectional Non-Crimp Fabric Carbon Fiber/Snap-Cure Epoxy Composite

Mechanical Properties of Kevlar® KM2 Single Fiber

Statistical Analysis on High Strain Rate Tensile Strength of T700 Carbon Fiber

Strain Rate and Temperature Effects on the Dynamic Tensile Behaviors of Basalt Fiber Bundles and Reinforced Polymer Composite