Abstract:Knitted textiles are a popular reinforcement in polymer composites for their high drape properties and superior impact energy absorption, making them suitable for specific composite components. Nevertheless, limited attention has been paid to modeling the mechanical behavior of knitted fabric composites since knitted textiles generally offer lower stiffness and strength. This study presents a 3D finite element (FE) modeling of a precise geometrical model of weft-knitted carbon fiber thermoplastic composite to better understand its nonlinear mechanical behavior and interface damage mechanisms under tension. Toward this end, a representative volume element (RVE) of the weft-knitted fabric composite with periodic boundary conditions (PBCs) is generated based on actual dimensions. The validity of the textile RVE to represent the macroscopic behavior was evaluated prior to analyzing the composite. The effect of fiber tow/matrix debonding during tension on the mechanical behavior of the composite is investigated using the cohesive zone model (CZM). Finally, the predicted results of the mechanical behavior of the composite with and without considering the interface failure are compared with the experimental measurements. It is found that the fiber tow/matrix interfacial strength has a significant effect on the tensile performance of the knitted fabric composites, particularly when they are subjected to a large strain. According to the simulation results, the highest tensile performance of the composite is achieved when the interfacial debonding is prevented. However, considering the fiber/matrix debonding in the modeling is essential to achieve a good agreement with the experimental results. In addition, it is concluded that stretching the fabric before composite manufacturing can substantially increase the tensile stiffness of the knitted composite.

Characterization of Mechanical Behavior of Kevlar 49 Fabrics

Mechanical Properties of Kevlar® KM2 Single Fiber

Experimental and Theoretical Study on the Strain Rate and Temperature Dependence of Mechanical Behaviour of Kevlar Fibre

Tensile properties and constitutive modeling of Kevlar29 fibers: from filaments to bundles

Statistical Mechanics of Kevlar® KM2® Plus Nanostructure: Deformations and High-Rate Impact

Numerical Simulation of the Mechanical Behavior of a Weft-Knitted Carbon Fiber Composite under Tensile Loading

Multiscale insights into the stretching behavior of Kevlar fiber

Fabrication and Experimental Estimation of Mechanical Properties of Kevlar-Glass/Epoxy Interwoven Composite Laminate

Experimental Study on the Mechanical Behavior and Failure Mechanism of 3d MWK Carbon/epoxy Composites under Quasi-Static Loading

EXPERIMENTAL STUDY ON THE TENSILE MECHANICAL BEHAVIOR OF KEVLAR49 FIBRE BUNDLES UNDER DIFFERENT STRAIN-RATES

Comparative studies on the effect of fabric structure on mechanical properties of carbon fiber/epoxy composites

Study of the Tribological Properties of Kevlar Fabric

An experimental study on the tensile behavior of Kevlar fiber reinforced aluminum laminates at high strain rates

Numerical simulation methodology of multi-layer Kevlar 49 woven fabrics in aircraft engine containment application

Effect of the Inter-Fiber Friction on Fiber Damage Propagation and Ballistic Limit of 2-D Woven Fabrics under A Fully Confined Boundary Condition

Study on the Numerical Simulation Methodology of Kevlar Fabric Wraps Structure under the Impact of High-Speed Rotating Blade

Shear response behavior of STF/kevlar composite fabric in picture frame test

Numerical Simulations To Determine Ballistic Strength Of 2-D Woven Fabrics

Mechanical Deformation Mechanisms in Knitted Fabric Composites

Macroscopic numerical simulation method of multi-phases STF impregnated Kevlar fabrics. Part 1: Quasi-static and dynamic mechanical test

High Strain-Rate Dynamic Mechanical Properties of Kevlar Fabrics Impregnated with Shear Thickening Fluid