Abstract:<p>Shear thickening fluids (STFs) were found to be effective at enhancing the energy absorption capacity of Kevlar fabrics, which is promising in the area of soft-wall containment casings. In the current study, an improved mesoscale numerical simulation method for the yarn level was developed to predict the properties of STF-Kevlar fabrics with various STF concentrations. In addition, quasi-static and dynamic tensile tests as well as yarn pull-out tests were performed. Based on the dynamic tensile behavior and friction between yarns, a mesoscale numerical simulation method was proposed for STF-Kevlar fabrics. Combined with a ballistic impact test, the numerical simulation method based on the yarn tests was verified. It was found that the STF generates a strain-rate strengthening effect due to its shear thickening behavior during quasi-static tensile tests conducted at 0.0001 and 0.001 s<sup>−1</sup>. The initial elastic modulus, tensile strength, and failure strain of the yarn were obtained from dynamic tensile tests using a split-Hopkinson tension bar (SHTB) apparatus. The yarn pulling process includes the yarn straightening stage and yarn translation stage. The pull-out force decreased with the pull-out rate for the STF-treated yarn. The pull-out force of the STF-treated fabric increased by up to 213.2% compared with the neat fabric at the same pull-out rate. Based on the yarn pull-out testing results, the friction coefficient between the weft and warp yarns was estimated. Mesoscale numerical simulations were performed based on the dynamic tension behavior and friction behavior of the yarn, which were verified through ballistic impact test. Although the friction characteristics of the three STF fabrics were not significantly different, the energy absorption of the STF-treated fabrics differed considerably. As the tensile strength increased, the energy absorption characteristics of the fabric improved considerably.</p>

The Effects of Gage Length and Strain Rate on Tensile Behavior of Kevlar® 29 Single Filament and Yarn

Tensile properties and constitutive modeling of Kevlar29 fibers: from filaments to bundles

Experimental and Theoretical Study on the Strain Rate and Temperature Dependence of Mechanical Behaviour of Kevlar Fibre

Experimental Study of Mechanical Properties of CFRP under Different Strain Rates and Temperatures

EXPERIMENTAL STUDY ON THE TENSILE MECHANICAL BEHAVIOR OF KEVLAR49 FIBRE BUNDLES UNDER DIFFERENT STRAIN-RATES

Mechanical Properties of Kevlar® KM2 Single Fiber

Tensile Behaviour and Strength Distribution of Polyvinyl-Alcohol Fibre at High Strain Rates

An experimental study on the tensile behavior of Kevlar fiber reinforced aluminum laminates at high strain rates

Effects of Fiber Shape on Mechanical Properties of Fiber Assemblies

Effects of temperature and low strain rate on tensile performance of aramid fiber bundle

Preparation and the influence of twist factor on cut resistance performance of Kevlar short fiber covered yarn fabric

Experimental evaluation and modified Weibull characterization of the tensile behavior of tri-component elastic-conductive composite yarn

Tensile Behavior of Carbon Fiber Bundles at Different Strain Rates

Statistical Analysis on High Strain Rate Tensile Strength of T700 Carbon Fiber

Effect of strain rate on tensile behavior in amorphous fibers by an in-situ video extensometer system

Yarn dynamic tensile behavior and meso-scale numerical simulation method for STF-Kevlar fabrics

Experimental Investigation on Strain Rate Effect of High-Performance Fiber Reinforced Cementitious Composites Subject to Dynamic Direct Tensile Loading

Multiscale insights into the stretching behavior of Kevlar fiber

Statistical Mechanics of Kevlar® KM2® Plus Nanostructure: Deformations and High-Rate Impact

Modeling and characterization of the mechanical properties of nanofiber yarn

Analysis of the influence of yarn angle on the mechanical behaviors of cured woven composites