Abstract:SHPB system was widely used to investigate the dynamical mechanical performances of materials. In this study, the mechanical performances of T700/BA9916 composite material were investigated through experiment and numerical simulation. The true stress-strain curves of composite samples were obtained, and the influences of temperatures and strain-rates on the mechanical performances of composite samples were discussed. The finite element model of SHPB setup was established, and the compression mechanical performances of composite samples were simulated. T700/BA9916 composite material exhibited significant temperature softening and strain-rate enhancement effect during experimental. The compression failure strength and elastic modulus increased with the increase in strain-rates while the failure strain decreased. The compression failure strength and elastic modulus decreased with the rise in temperatures while the failure strain increased. The composite samples didn’t exhibit typical brittle failure at high temperature but significant temperature softening effect. A plateau phase existed between incident wave and reflection wave, and the slope of plateau phase was small when temperatures were low while that was large when temperatures were high. The numerical results were compared with experimental results to validate the proposed numerical method can be used to simulate the mechanical performances of composite materials.

Statistical Analysis on High Strain Rate Tensile Strength of T700 Carbon Fiber

Tensile Behavior of Carbon Fiber Bundles at Different Strain Rates

Tensile mechanical behavior of T300 and M40J fiber bundles at different strain rate

Experimental Study of Mechanical Properties of CFRP under Different Strain Rates and Temperatures

Experimental Study on Tensile Behavior of Carbon Fiber and Carbon Fiber Reinforced Aluminum at Different Strain Rate

Failure mechanisms of carbon nanotube fibers under different strain rates

A Statistical Model and Experimental Study of the Strain Rate and Temperature Dependence of the Strength of Fibers

Modeling and Testing Strain Rate-Dependent Tensile Strength of Carbon/Epoxy Composites

An experimental study on the tensile behavior of a unidirectional carbon fiber reinforced aluminum composite at different strain rates

A Modified Weibull Model for Tensile Strength Distribution of Carbon Nanotube Fibers with Strain Rate and Size Effects

EXPERIMENTAL STUDY ON THE TENSILE MECHANICAL BEHAVIOR OF KEVLAR49 FIBRE BUNDLES UNDER DIFFERENT STRAIN-RATES

Dynamic tensile properties of carbon fiber and carbon fiber reinforced aluminum

Study on the Mechanical Performances of Carbon Fiber/epoxy Composite Material Subjected to Dynamical Compression and High Temperature Loads

Nonlinear Stress-Strain Behavior of Carbon Nanotube Fibers Subject to Slow Sustained Strain Rate

Orientation-dependent Tensile Deformation and Damage of a T700 Carbon Fiber/epoxy Composite: A Synchrotron-Based Study

Rate-dependent Tensile Behavior and Statistic Strength Model for Fiber Tow Composites

Statistical Dynamic Tensile Strength of Uhmwpe-Fibers

Experimental and Theoretical Study on the Strain Rate and Temperature Dependence of Mechanical Behaviour of Kevlar Fibre

Statistical Characterization of Unidirectional Tensile Strength of FRP Composites

A statistical model and experimental study of the strain-rate dependence of the strength of fibres

Experimental Study of In-plane Mechanical Properties of Carbon Fibre Woven Composite at Different Strain Rates