Abstract:The preparation of metal particle reinforced aluminum matrix composites by powder metallurgy has been widely studied in recent years. In this work, the effect of microwave sintering temperature on the microstructure and mechanical behavior of high-entropy alloys (HEAs) reinforced aluminum matrix composites prepared by powder metallurgy was investigated. Due to the outstanding microwave absorbing property of ferromagnetic HEAs particles, the composites sintering proceeded efficiently. At 480℃, the aluminum matrix in the composite material is more compact, and the HEAs particles in the composite material are more evenly distributed, and the interface between HEAs particles and aluminum matrix is smooth. At 500℃, the intensity of HEAs diffraction peak in the composite material changes significantly. At 520℃, AlNi solid solution phase with BCC structure appears in the HEAs region, and the HEAs structure changes from FCC to FCC+BCC, and Al5Cr8, Al5Co2 and Al2Cu phases precipitate. At 480℃, the nanohardness and elastic modulus at the interface reaches 1245.31 MPa and 72.45 GPa, respectively, showing relatively excellent interfacial bonding strength. The elastic modulus of both HEAs reinforcement and aluminum matrix decrease at a sintering temperature above 480℃, and the composites have hard and brittle characteristics. At 480℃, the macroscopic compression and yield strengths of composites are ~421.2 MPa and ~289.5 MPa, and the maximum shrinkage rate is ~65.3%, exhibiting excellent strength and toughness.

Properties and Microstructural Evolution of W-Ni-Fe Alloy Via Microwave Sintering

Phase, Microstructure and Properties Evolution of Fine-Grained W–Mo–Ni–Fe Alloy During Spark Plasma Sintering

Fabrication of nanocrystalline supersaturated W–Al alloys with enhanced thermal stability and high sinterability

Phase transformation and thermal stability of mechanically alloyed W–Ni–Fe composite materials

Characteristics of 14Cr-ODS ferritic alloy fabricated by mechanically alloying and microwave sintering

Elevated Temperature Tensile Behavior and Microstructure Evolution of Liquid Phase Sintered 90w–7ni–3fe Alloy

The simultaneous improvement of strength and ductility of the 93W-4.6Ni-2.4Fe prepared by additive manufacturing via optimizing sintering post-treatment

Microstructure and mechanical properties of liquid–phase sintered W@NiFe composite powders

The sintering of tungsten heavy alloy by mechanical alloying

Microstructure and properties of liquid-phase sintered tungsten heavy alloys by using ultra-fine tungsten powders

Study on synthesis and structure of mechanically alloyed W-Ni-Fe nanocomposite powders

The effect of fine W particles in matrix phase on mechanical properties of tungsten heavy alloys

Microstructure and mechanical properties of fine-grained W-7Ni-3Fe heavy alloy by spark plasma sintering

Microstructure and Mechanical Properties of a Hot-Hydrostatically Extruded 93w–4.9ni–2.1fe Alloy

Effect of Nanocrystalline Tungsten Powders on the Microstructure and Properties of Liquid-Phase Sintered 93W Alloys

Preparation and mechanical properties of SiCw-reinforced WC-10Ni3Al cemented carbide by microwave sintering

Microstructure, Phase Transformation and Mechanical Property of Ni-Co-Mn-In Alloy Prepared by Spark Plasma Sintering

Effect of vacuum heat treatment on microstructure evolution and mechanical properties of 93W-4.9Ni-2.1Fe-(ZrB2) alloys

Studies on thermodynamic and kinetic and phase evolution of W-Ni-Fe powder during mechanical alloying

Improving mechanical properties of W-Ni 3 Al alloy through Zr element addition: Solid-solution and oxide particle strengthening

Microstructural characteristics and mechanical behavior of microwave-assisted sintered ferromagnetic FeCoNi1.5CrCu HEAp/Al matrix composites