Abstract:PEDOT:PSS – the most widely used hole transport layer (HTL) in organic solar cells – is found to induce local p‐doping near the HTL interface inside the photoactive layer, resulting in photocurrent loss. This loss can be mitigated by adding a self‐assembled monolayer of 2PACz on PEDOT:PSS, ultimately improving the device performance. Poly(3,4‐ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) has been one of the most established hole transport layers (HTL) in organic solar cells (OSCs) for several decades. However, the presence of PSS− ions is known to deteriorate device performance via a number of mechanisms including diffusion to the HTL‐active layer interface and unwanted local chemical reactions. In this study, it is shown that PSS− ions can also result in local p‐doping in the high efficiency donor:non‐fullerene acceptor blends – resulting in photocurrent loss. To address these issues, a facile and effective approach is reported to improve the OSC performance through a two‐component hole transport layer (HTL) consisting of a self‐assembled monolayer of 2PACz ([2‐(9H‐Carbazol‐9‐yl)ethyl]phosphonic acid) and PEDOT:PSS. The power conversion efficiency (PCE) of 17.1% using devices with PEDOT:PSS HTL improved to 17.7% when the PEDOT:PSS/2PACz two‐component HTL is used. The improved performance is attributed to the overlaid 2PACz layer preventing the formation of an intermixed p‐doped PSS− ion rich region (≈5–10 nm) at the bulk heterojunction‐HTL contact interface, resulting in decreased recombination losses and improved stability. Moreover, the 2PACz monolayer is also found to reduce electrical shunts that ultimately yield improved performance in large area devices with PCE enhanced from 12.3% to 13.3% in 1 cm2 cells.

Enhancement of the power conversion efficiency of P3HT:PCBM based solar cells by an interfacial effect between P3HT and PEDOT

Performance Improvement of Polymer Solar Cells by Using A Solvent-Treated Poly(3,4-Ethylenedioxythiophene):Poly(Styrenesulfonate) Buffer Layer

Simultaneously Enhancing the Efficiency and Stability of Perovskite Solar Cells by Using P3HT/PEDOT:PSS as a Double Hole Transport Layer

Enhancement of the Efficiency and Stability of Planar P-I-n Perovskite Solar Cells Via Incorporation of an Amine-Modified Fullerene Derivative As a Cathode Buffer Layer

Dual-interface modification effect of Carbon Quantum Dots on the performance of Polymer Solar Cells

[6,6]-Phenyl-c61-butyric Acid 2-((2-(dimethylamino)ethyl)(methyl)amino)-ethyl Ester As an Acceptor and Cathode Interfacial Material in Polymer Solar Cells

Study on the Influence of Embedded Structure of Carbon Quantum Dots of the Organic Solar Cells with the Territory Active Layer Structure of P3HT: PC61BM: CQDs

Enhancement of the power conversion efficiency by expanding the absorption spectrum with fluorescence layers.

Improving Photovoltaic Performance of Carbon-Based CsPbBr3 Perovskite Solar Cells by Interfacial Engineering Using P3HT Interlayer

Energy Level Tuning in CsPbBr3 Perovskite Solar Cells through In Situ-Polymerized PEDOT Hole Transport Layer

Zn0.8Cd0.2S@PCBM Hybrid As an Efficient Electron Transport Layer for Air‐Processed P‐i‐n Planar Perovskite Solar Cells: Improvement of Interfacial Electron Transfer and Device Stability

Large Active Area Inverted Tandem Polymer Solar Cell with High Performance Via Alcohol Treatment on the Surface of Bottom Active Layer P3HT:ICBA

Design and Optimization of High Performance P3HT: PCBM Polymer Solar Cell Using P3HT Buffer Layer

Boosting the Efficiency of Non-fullerene Organic Solar Cells via a Simple Cathode Modification Method

Enhancing performance of inverted polymer solar cells by an effective novel double layer combining MoO3 and PEIE

A DMF-assisted solution process boosts the efficiency in P3HT:PCBM solar cells up to 5.31%.

Mitigating Detrimental Effect of Self‐Doping Near the Anode in Highly Efficient Organic Solar Cells

Improving efficiency of polymer hole transport layer based perovskite solar cells via interfacial modification

Interfacial Carrier-Transfer Channel Optimization Based on Hydrogen Bonds for High-Performance Organic Solar Cells

Performance improvement of annealing-free P3HT : PCBM-based polymer solar cells via 3-methylthiophene additive

Improved interfacial property by small molecule ethanediamine for high performance inverted planar perovskite solar cells