Abstract:We present a novel electron transport (ET) polymer composed of polyfluorene grafted with a K(+)-intercalated crown ether involving six oxygen atoms (PFCn6:K(+)) for bulk-heterojunction polymer solar cells (PSCs) with regioregular poly(3-hexylthiophene) (P3HT) as the donor and indene-C(60) bisadduct (ICBA) or indene-[6,6]-phenyl-C(61)-butyric acid methyl ester (IPCBM) as the acceptor in the active layer and with Al or Ca/Al as the cathode. A remarkable improvement in the power conversion efficiency (PCE) (measured in air) was observed upon insertion of this ET layer, which increased the PCE from 5.78 to 7.5% for a PSC with ICBA and Ca/Al (5.53 to 6.63% with IPCBM) and from 3.87 to 6.88% for a PSC with ICBA and Al (3.06 to 6.21% with IPCBM). This ET layer provides multiple functionalities: (1) it generates an optical interference effect for redistribution of light intensity as an optical spacer; (2) it blocks electron-hole recombination at the interface with the cathode; (3) it forms an interfacial dipole that promotes the vacuum level of the cathode metal; and (4) it enhances electron conduction, as evidenced by (1) the increase in total absorption of 1:1 w/w P3HT:ICBA by a factor of 1.3; (2) the reduction in the hole-only current density profile by a factor of 3.3 at 2.0 × 10(5) V/cm; (3) the decrease of 0.81 eV in the work function of Al from 4.28 to 3.47 eV, as determined by UV photoelectron spectroscopy; and (4) the decrease in the series resistance of PSCs with ICBA and Al by a factor of 4.5, as determined by the current-voltage characteristic under dark conditions; respectively. The PSC of 7.5% is the highest among the reported values for PSC systems with the simplest donor polymer, P3HT.

Enhancement of the power conversion efficiency by expanding the absorption spectrum with fluorescence layers.

PCDTBT: from Polymer Photovoltaics to Light-Emitting Diodes by Side-Chain-Controlled Luminescence

Light Management for Fullerene-Based Semitransparent Polymer Solar Cells with a Distributed Bragg Reflector

High Performance Solar Cell Based on Ultra-Thin Poly(3-Hexylthiophene): Fullerene Film Without Thermal and Solvent Annealing

Enhancement of the power conversion efficiency of P3HT:PCBM based solar cells by an interfacial effect between P3HT and PEDOT

Study on the influence of embedded structure of carbon quantum dots of the organic solar cells with the territory active layer structure of P3HT: PC 61 BM: CQDs

Efficiency enhancement in P3HT-based polymer solar cells with a NaYF 4:2% Er3+, 18% Yb3+ up-converter

Synergic Interface and Optical Engineering for High‐Performance Semitransparent Polymer Solar Cells

A ternary organic electron transport layer for efficient and photostable perovskite solar cells under full spectrum illumination

Photomultiplication Photodetectors with P3ht: Fullerene-Free Material As the Active Layers Exhibiting A Broad Response

The Dependence of the Cathode Architecture on the Photoactive Layer Morphology in Bulk-Heterojunction Polymeric Solar Cells

Extending the Absorption Spectra and Enhancing the Charge Extraction by the Organic Bulk Heterojunction for CsPbBr3 Perovskite Solar Cells

Extending the Absorption Spectra and Enhancing the Charge Extraction by the Organic Bulk Heterojunction for CsPbBr 3 Perovskite Solar Cells

Improvement in Polymer Solar Cell Performance and Eliminating Light Soaking Effect Via UV-light Treatment on Conjugated Polyelectrolyte Interlayer

Achieving over 11% Power Conversion Efficiency in PffBT4T-2OD-based Ternary Polymer Solar Cells with Enhanced Open-Circuit-voltage and Suppressed Charge Recombination

Multiple Functionalities of Polyfluorene Grafted with Metal Ion-Intercalated Crown Ether As an Electron Transport Layer for Bulk-Heterojunction Polymer Solar Cells: Optical Interference, Hole Blocking, Interfacial Dipole, and Electron Conduction.

Efficient Multilayer Organic Solar Cells Using the Optical Interference Peak

Enhancement Mechanisms of the Power Conversion Efficiency for the P3HT:PCBM Bulk Heterojunction Solar Cells with a LiF Cathode Buffer Layer Due to Thermal Annealing

Double Cascading Charge Transfer at Integrated Perovskite/Organic Bulk Heterojunctions for Extended Near‐Infrared Photoresponse and Enhanced Photocurrent

Improving efficiency of polymer hole transport layer based perovskite solar cells via interfacial modification

Efficiency Enhancement of P3HT:PCBM Polymer Solar Cells Using Oligomers DH4T As the Third Component