Abstract:Recently, the resistance variability of Resistive Random Access Memory (RRAM) based array has been exploited to design a weak Physical Unclonable Function (PUF) for the cryptographic key generation. Generally, memory-based PUF is weak PUF as the challenge-response pair (CRP) space is limited by the memory capacity. In this work, we propose a design of RRAM based strong PUF for device authentication by employing Secure Hash Algorithm (SHA). The key idea is to split the challenge bits into two segments. The first segment is fed into the RRAM array and the output of the RRAM array is mixed with the second segment as the input to the SHA module, thereby significantly increasing the CRP space. To analyze the properties of the proposed strong PUF such as uniqueness and reliability, the resistance variability is experimentally measured from the fabricated 1 kb HfO2 based RRAM arrays, and the read current distribution is then modeled. The simulation shows that when the number of bits from RRAM is larger than 8 bits, the proposed PUF can present good uniqueness. In order to achieve higher security against PUF modeling attack, however, more bits from RRAM array should be feed into SHA module. With 32-bit from RRAM array, it could achieve average uniqueness ~49.95%, uniformity of `1's ~49.81%, diffusiveness ~49.97% with tight distributions. The use of SHA imposes a strict requirement on the reliability, thus multiple RRAM cells are grouped and used to statistically minimize the risk of early retention failure of a single cell. On the other hand, the use of SHA provides a strong resistance against the machine learning attack as demonstrated through 3-layer multi-layer perceptron (MLP) modeling.

64kb Logic Rram Chip Resisting Physical And Side-Channel Attacks For Encryption Keys Storage

A Logic Resistive Memory Chip for Embedded Key Storage with Physical Security

A Physically-Secure Write Scheme of Multi-Time Programmable Rram for Critical Information Storage

A novel PUF against machine learning attack: Implementation on a 16 Mb RRAM chip

A 28 nm 512 Kb adjacent 2T2R RRAM PUF with interleaved cell mirroring and self-adaptive splitting for high density and low BER cryptographic key in IoT devices

Challenging on-chip SRAM security with boot-state statistics

A 28nm 512kb Adjacent 2T2R RRAM PUF with Interleaved Cell Mirroring and Self-Adaptive Splitting for Extremely Low Bit Error Rate of Cryptographic Key.

RRAM-Based Hardware Security Primitives

Application of Resistive Random Access Memory in Hardware Security: A Review

A Novel DES Encryption Circuit Based on RRAM XOR Gates

Concealable Physical Unclonable Function Generation and In-Memory Encryption Machine using Vertical Self-Rectifying Memristors

A 22-nm 1-Mb 1024-b Read Data-Protected STT-MRAM Macro With Near-Memory Shift-and-Rotate Functionality and 42.6-GB/s Read Bandwidth for Security-Aware Mobile Device

A RRAM-based Data Hiding Technique Utilizing the Impact of Form Condition on SET Performance

Extending 1kb RRAM array from weak PUF to strong PUF by employment of SHA module

A Novel RRAM Based PUF for Anti-Machine Learning Attack and High Reliability

A Small Area And Low Power True Random Number Generator Using Write Speed Variation Of Oxide-Based Rram For Iot Security Application

The effect of switching and cycle-to-cycle variations of RRAM on 4-bit encryption/decryption process

A 2mb Reram with Two Bits Error Correction Codes Circuit for High Reliability Application

A Novel PUF Using Stochastic Short-Term Memory Time of Oxide-Based RRAM for Embedded Applications

A Novel Page-Forming Scheme with Ultra-Low Bit-Error-Rate and High Reliability on a 1mb RRAM Chip

Pin Tumbler Lock: A shift based encryption mechanism for racetrack memory