Abstract:This work presents a highly reliable and tamper-resistant design of Physical Unclonable Function (PUF) exploiting Resistive Random Access Memory (RRAM). The RRAM PUF properties such as uniqueness and reliability are experimentally measured on 1 kb HfO 2 based RRAM arrays. Firstly, our experimental results show that selection of the split reference and offset of the split sense amplifier (S/A) significantly affect the uniqueness. More dummy cells are able to generate a more accurate split reference, and relaxing transistor's sizes of the split S/A can reduce the offset, thus achieving better uniqueness. The average inter-Hamming distance (HD) of 40 RRAM PUF instances is ~42%. Secondly, we propose using the sum of the read-out currents of multiple RRAM cells for generating one response bit, which statistically minimizes the risk of early retention failure of a single cell. The measurement results show that with 8 cells per bit, 0% intra-HD can maintain more than 50 hours at 150 °C or equivalently 10 years at 69 °C by 1/kT extrapolation. Finally, we propose a layout obfuscation scheme where all the S/A are randomly embedded into the RRAM array to improve the RRAM PUF's resistance against invasive tampering. The RRAM cells are uniformly placed between M4 and M5 across the array. If the adversary attempts to invasively probe the output of the S/A, he has to remove the top-level interconnect and destroy the RRAM cells between the interconnect layers. Therefore, the RRAM PUF has the “self-destructive” feature. The hardware overhead of the proposed design strategies is benchmarked in 64 × 128 RRAM PUF array at 65 nm, while these proposed optimization strategies increase latency, energy and area over a naive implementation, they significantly improve the performance and security.

A RRAM-based Data Hiding Technique Utilizing the Impact of Form Condition on SET Performance

Hiding Information for Secure and Covert Data Storage in Commercial ReRAM Chips

A Novel Page-Forming Scheme with Ultra-Low Bit-Error-Rate and High Reliability on a 1mb RRAM Chip

Methods to Realize Low-BER and High-Reliability RRAM Chip With Fast Page-Forming Capability

A Novel RRAM Based Watermark Technique Utilizing the Impact of Forming Conditions on Reset Distribution

Research on Single Event Effect Test of a RRAM Memory and Space Flight Demonstration

A Highly Reliable RRAM Physically Unclonable Function Utilizing Post-Process Randomness Source

RRAM-Based Hardware Security Primitives

A Logic Resistive Memory Chip for Embedded Key Storage with Physical Security

A Self-Terminated Operation Scheme for High-Parallel and Energy-Efficient Forming of RRAM Array

BEOL Based RRAM with one extra-mask for low cost, highly reliable embedded application in 28 nm node and beyond

A Highly Reliable and Tamper-Resistant RRAM PUF: Design and Experimental Validation.

Programming Strategy Optimization of RRAM Fabricated by 28 nm Standard CMOS Process

A Physically Unclonable Function with BER < 0.35% for Secure Chip Authentication Using Write Speed Variation of RRAM.

A Novel Bi-functional Memory-PUF Module Utilizing Adjustable Switching Window of RRAM

A Novel PUF Using Stochastic Short-Term Memory Time of Oxide-Based RRAM for Embedded Applications

Stateful Logic Operations in One-Transistor-One- Resistor Resistive Random Access Memory Array

On-Chip Write & Verify and Endurance Enhancer Circuits Towards Multi-level RRAM Array

Resistance Switching for RRAM Applications.

Design and Implementation of Robust and Low-Cost SRAM PUF Using PMOS and Linear Shift Register Extractor

A 130nm 1Mb HfOx embedded RRAM macro using self-adaptive peripheral circuit system techniques for 1.6X work temperature range