Abstract:In recent years, the International Maritime Organization (IMO), Europe, and the United States and other countries have set up different emission control areas (ECA) for ship exhaust pollutants to enforce more stringent pollutant emission regulations. In order to meet the current IMO Tier III emission regulations, an after-treatment device must be installed in the exhaust system of the ship power plant to reduce the ship NOx emissions. At present, selective catalytic reduction technology (SCR) is one of the main technical routes to resolve excess NOx emissions of marine diesel engines, and is the only NOx emission reduction technology recognized by the IMO that can be used for various ship engines. Compared with the conventional low-pressure SCR system, the high-pressure SCR system can be applied to low-speed marine diesel engines that burn inferior fuels, but its working conditions are relatively harsh, and it can be susceptible to operational problems such as sulfuric acid corrosion, salt blockage, and switching delay during the actual ship tests and ship applications. Therefore, it is necessary to improve the design method and matching strategy of the high-pressure SCR system to achieve a more efficient and reliable operation. This article summarizes the technical characteristics and application problems of marine diesel engine SCR systems in detail, tracks the development trend of the catalytic reaction mechanism, engine tuning, and control strategy under high sulfur exhaust gas conditions. Results showed that low temperature is an important reason for the formation of ammonium nitrate, ammonium sulfate, and other deposits. Additionally, the formed deposits will directly affect the working performance of the SCR systems. The development of SCR technology for marine low-speed engines should be the compromise solution under the requirements of high sulfur fuel, high thermal efficiency, and low pollution emissions. Under the dual restrictions of high sulfur fuel and low exhaust temperature, the low-speed diesel engine SCR systems will inevitably sacrifice part of the engine economy to obtain higher denitrification efficiency and operational reliability.

Kinetics analysis of catalytic processes for marine diesel Urea-SCR system

Fluid Mixing Optimization Strategy of Catalytic Reactor for Marine SCR System

Investigation on an Innovative Sorption System to Reduce Nitrogen Oxides of Diesel Engine by Using Carbon Nanoparticle

Optimization Analysis of Various Parameters Based on Response Surface Methodology for Enhancing NOx Catalytic Reduction Performance of Urea Selective Catalytic Reduction on Cu-ZSM-13 Catalyst

Determination of Chemical Kinetic Parameters for Adsorption and Desorption of NH3 in Cu-Zeolite Used as a DeNOx SCR Catalyst of Diesel Engines

Modeling and Performance Analysis of SCR DeNOx Catalyst for Reducing NOx Emissions in Diesel Engine

Optimal Design of Diesel Engine Urea-SCR Converter

Influence Factors of DeNOx Behavior in Urea-SCR Catalytic Converter of Diesel

3D Modeling of Flow, Spray of Reductant and Surface Chemical Reaction in Diesel Urea SCR-NOx Catalytic Converter

Study on the effect of blending hydrocarbon-based biodiesel on the performance of SCR system and urea calibration method for marine engines

Application and Development of Selective Catalytic Reduction Technology for Marine Low-Speed Diesel Engine: Trade-Off among High Sulfur Fuel, High Thermal Efficiency, and Low Pollution Emission

Newly developed detailed urea decomposition mechanism by marine engine urea-SCR system crystallization test and DFT calculations

Modeling and simulation of marine SCR system based on Modelica

Enhancement of the Ammonia Kinetic Mechanism for Nitrogen-Based Pollutant Chemistry

Tuning the Standard SCR Reaction Kinetics to Model NO Conversion in a Diesel Engine Exhaust SCR Catalyst System Under Steady State Conditions in 1D and 3D Geometries Using Ammonia Gas as the Reductant

Urea Injection and Uniformity of Ammonia Distribution in SCR System of Diesel Engine

Investigation on the applicability of parameters identification of marine diesel engine SCR kinetic model based on Discrete-Grid algorithm

Mechanism-Based Kinetic Modeling of N2o Formation on Scr Activity over Cu-Ssz-13 Catalysts for Diesel Vehicle

Design and testing of an independently controlled urea SCR retrofit system for the reduction of NOx emissions from marine diesels

CFD-based investigation of NO x removal from industrial waste gas by selective catalytic reduction (SCR) and selective non-catalytic reduction (SNCR) process using NH 3

Urea-related Reactions and Their Active Sites over Cu-SAPO-34: Formation of NH3 and Conversion of HNCO