Abstract:Ammonia is a zero-carbon candidate fuel for the decarbonization of internal combustion (IC) engines. A concern when using ammonia in IC engines is the increased emissions of nitrogen oxides (NOX), due to the additional nitrogen in the ammonia molecule. Compared to conventional petroleum such as gasoline and diesel, ammonia combustion adds the fuel NOX formation mechanism in addition to the original thermal NOX generation pathway, which further complicates the NOX emission characteristics of ammonia engines. Decoupling fuel NOX and thermal NOX helps to increase the understanding of the formation and evolutionary characteristics of nitrogen oxides occurring inside ammonia engines, but the available literature lacks studies in this respect. The purpose of this study is to fill this research gap and to propose a methodology for decoupling fuel NOX and thermal NOX. In brief, an artificial elemental nitrogen is applied to the Zeldovich mechanism and to the diatomic nitrogen in the combustion air, which allows the formation of NOX from the elemental nitrogen in the ammonia fuel to be separated from the NOX formed from the nitrogen in the air. A three dimensional (3D) computational fluid dynamics (CFD) model demonstrates the effectiveness of this approach and investigates the spatial and temporal distribution characteristics of thermal NOX and fuel NOX in the turbulent combustion field of ammonia engines. The in-cylinder activity analysis suggests that this separation of the NOX formation mechanism slightly alters the nitrogen-based chemistry, which is unavoidable. However, this approach still allows a reasonable characterization of the formation and evolution of fuel NOX and thermal NOX. The simulations show that fuel NOX is formed during ammonia oxidation because fuel NOX is an intermediate species, while thermal NOX has a high concentration in the burned zone because it is related to the temperature and the residence time of nitrogen at that temperature, both of which are expected and support the successful decoupling of fuel and atmospheric nitrogen. In addition, nitrous oxide (N2O) emissions come from the fuel NOX mechanism and are mainly distributed along the liner walls as it is formed by partial oxidation of ammonia released from the crevices during the late oxidation process. Moreover, the concentrations of both thermal and fuel-based nitrogen monoxide vary with the chemical equilibrium that changes with piston motion, and their concentrations are always comparable. As a result, combustion strategies for ammonia internal combustion engines needs to consider both thermal and fuel NOX reduction mechanisms, where the main difficulty is the N2O reduction. Catalytic combustion mode may be a viable strategy to improve the oxidation efficiency of the ammonia fuel trapped in the crevice and reduce N2O emissions in the cylinder.

Investigation on an Innovative Sorption System to Reduce Nitrogen Oxides of Diesel Engine by Using Carbon Nanoparticle

Performance Analysis on a Novel Self-Adaptive Sorption System to Reduce Nitrogen Oxides Emission of Diesel Engine

Investigation on Thermal Properties of a Novel Fuel Blend and Its Diesel Engine Performance

Development and testing of novel Chemisorption Composite using SrCl 2 -NEG adding with Carbon coated Ni and Al

Analysis of Composite Sorbents for Ammonia Storage to Eliminate NOx Emission at Low Temperatures

Applying Separate Treatment of Fuel- and Air-Borne Nitrogen to Enhance Understanding of In-Cylinder Nitrogen-Based Pollutants Formation and Evolution in Ammonia-Diesel Dual Fuel Engines

Numerical Investigation into the Characteristics of Fuel-Borne Nitrogen Pollutants in Ammonia-Diesel Dual Fuel Engines Through Implementing Atmospheric Nitrogen Unreactivity

Formation and Evolution of Thermal and Fuel Nitrogen Oxides in the Turbulent Combustion Field of Ammonia Internal Combustion Engines

Solid–Gas Sorption System for Ammonia Storage and Delivery Driven by Engine Waste Heat for NOx Reduction of Diesel Engine

Experimental Study on NOx Reduction of Diesel Engine by EGR Coupled with SCR

Experimental investigation to enhance the low‐temperature nitrogen oxide emission reduction in biodiesel exhaust using selective catalytic reduction with direct ammonia injection and manganese cerium zirconia catalyst

Experimental Study on the Particulate Matter and Nitrogenous Compounds from Diesel Engine Retrofitted with DOC+CDPF+SCR

Investigation on the reduction in unburned ammonia and nitrogen oxide emissions from ammonia direct injection SI engine by using SCR after-treatment system

Multi-stage Ammonia Production for Sorption Selective Catalytic Reduction of NOx

Catalytic performance of Ag/Al2O3-C2H5OH-Cu/Al2O3 system for the removal of NOx from diesel engine exhaust.

Investigation On Scr To Reduce Nox Emission

Review on Selective Catalytic Reduction Technology of Diesel Engines

Design and testing of an independently controlled urea SCR retrofit system for the reduction of NOx emissions from marine diesels

Experimental Study on Solid SCR Technology to Reduce NOx Emissions from Diesel Engines

Effect of SCR Downsizing and Ammonia Slip Catalyst Coating on the Emissions from a Heavy-Duty Diesel Engine

Progress of Research on Selective Catalytic Reduction Technology for Vehicle Diesel Engine