Abstract:Diesel vehicles are an important source of nitrogen oxide (NO_x) emissions in the atmosphere. Selective Catalytic Reduction (SCR) systems are the primary post-treatment devices for reducing NO_x emissions from diesel engines. In China, diesel vehicles mostly adopt the high-efficiency SCR technology route to meet the China VI emission regulations, which requires a NO_x conversion efficiency of around 95% for SCR. To achieve low NO_x emissions in full working condition, it is necessary to develop wide-temperature-range, high activity, and high durability catalysts to ensure that SCR has a high NO_x conversion efficiency in a wide temperature window, and to improve catalyst hydrothermal aging and sulfur poisoning. The new regulations require stricter NO_x emission limits during cold-start phases, and close-coupled SCR and SCR capture technology can enable exhaust gas in SCR to quickly reach the urea injection temperature under low engine exhaust temperature conditions, which is beneficial for reducing NO_x emissions during the cold-start phases. The optimization of SCR system injection control strategy is a key factor in ensuring high NO_x conversion efficiency and avoiding NH_3 leakage. The development of SCR control strategy should consider the uncertainty of hardware measurements, and the increasing complexity of the post-treatment system configuration brings new challenges to the development of SCR system control strategies. New SCR reductants such as solid ammonium and reducing gases (hydrocarbons, hydrogen, and CO) can significantly improve the drawbacks of urea as a reductant carrier, but large-scale application of these new reductants has not been realized.

Optimal Design of Diesel Engine Urea-SCR Converter

Optimizing Flow Field in an SCR System of a 600 MW Power Plant: Effects of Static Mixer Alignment Style

Fluid Mixing Optimization Strategy of Catalytic Reactor for Marine SCR System

3D Modeling of Flow, Spray of Reductant and Surface Chemical Reaction in Diesel Urea SCR-NOx Catalytic Converter

Influence Factors of DeNOx Behavior in Urea-SCR Catalytic Converter of Diesel

Investigation on an Innovative Sorption System to Reduce Nitrogen Oxides of Diesel Engine by Using Carbon Nanoparticle

Influence of Urea-SCR System Parameters on NOx Conversion Rate and Liquid Film

Research on Optimization Design of SCR Nozzle for National VI Heavy Duty Diesel Engine

Optimization Analysis of Various Parameters Based on Response Surface Methodology for Enhancing NOx Catalytic Reduction Performance of Urea Selective Catalytic Reduction on Cu-ZSM-13 Catalyst

Application of CFD in the optimal design of a SCR–DeNOx system for a 300 MW coal-fired power plant

Design and Numerical Simulation Study of Diesel Engine Urea-SCR System's Mixer

Experimental Study on Improving NO, Conversion Efficiency of Urea-SCR System for Diesel Engine

Optimal design of a SCR-DeNOx system for a 300MW coal-fired power plant

Experiment and Simulation of Ammonia Distribution Uniformity for Diesel Engine Urea-SCR

Design and optimization of exhaust gas aftertreatment system for a heavy-duty diesel engine

Urea Injection and Uniformity of Ammonia Distribution in SCR System of Diesel Engine

Numerical Investigation on the Urea Deposit Formation Process in a Selective Catalytic Reduction System of a Diesel Engine Based on a Fluid–Solid Coupling Method

Investigating the Optimization Design of Internal Flow Fields Using a Selective Catalytic Reduction Device and Computational Fluid Dynamics

Experimental investigation of urea injection strategy for close-coupled SCR aftertreatment system to meet ultra-low NO<i><sub>x</sub></i> emission regulation

CFD Simulation of Flue Gas DeNOx Process to Improve NOx Removal Efficiency

Review on Selective Catalytic Reduction Technology of Diesel Engines