Abstract:Brillouin optical time-domain analysis (BOTDA) using distributed Brillouin amplification (DBA) only requires a milliwatt-level pump to achieve a sensing range beyond 100 km, which provides a powerful tool for temperature/strain sensing. However, similar to the majority of other long-range BOTDAs, the state-of-the-art reports require > 1000 times average, severely restricting the sensing speed. The blind area over tens of kilometers caused by the nonuniform Brillouin response and parasitic amplitude modulation (AM) are crucial factors affecting the signal-to-noise ratio (SNR). Here, a comprehensive performance optimization and substantial enhancement for BOTDA sensors was presented by the direct demodulation of an injection-locked dual-bandwidth probe wave. Injection locking (IL) can completely eliminate the impact of AM noise; dual-bandwidth probe enables self-adaptive pulse loss compensation, thereby intensifying the SNR flatness along the ultralong fiber, and direct probe demodulation can overcome nonlocal effects and allows ∼19.7 dB enhancement of probe input power. Therefore, using only 100 times average, ∼148.3 km sensing, and ∼5 m spatial resolution were achieved with < ∼0.8 MHz standard deviation of Brillouin frequency shift (BFS) over a broad range (∼131.7 km). The reduction in averages was more than 10 times that of the reported majority of long-range BOTDAs. Such performances were achieved without using time-consuming or post-processing techniques, such as optical pulse coding and image denoising. Because this approach is compatible with optical chirp chain technique without frequency sweeping, fast acquisition (0.3 s) was also realized, which has the potential for fast sensing at 3.3 Hz along a ∼150 km fiber.

Novel long-distance fiber-optic sensing systems based on random fiber lasers

Wideband Remote-Sensing Based on Random Fiber Laser

Advances in Random Fiber Lasers and Their Sensing Application

Implementation of Er-doped random fiber laser self-mixing sensor with ultra-limit sensitivity

A Novel Fiber Bragg Grating Sensor Configuration for Long-Distance Quasi-Distributed Measurement

Ultra-Long-Distance Hybrid BOTDA/Ф-OTDR

Bi-Directional Brillouin Optical Time Domain Analyzer System for Long Range Distributed Sensing

Low-Loss Random Fiber Gratings Made With an fs-IR Laser for Distributed Fiber Sensing

190km Φ-OTDR with bidirectional Raman and relay erbium-doped fiber hybrid amplification

Ultra-long-distance (>160 Km) Distributed Optic Fiber Vibration Sensing System Without an In-Line Repeater.

A half-open cavity random fiber laser based on a single-mode fiber and fiber Bragg grating

Hybrid Fiber-Optic Sensing Integrating Brillouin Optical Time-Domain Analysis and Fiber Bragg Grating for Long-Range Two-Parameter Measurement

Towards fast sensing along ultralong BOTDA: flatness enhancement by utilizing injection-locked dual-bandwidth probe wave

Long-distance OFDR with High Spatial Resolution based on Time Division Multiplexing

Design and Realization of Briliouin Optical Time Domain Reflectometer with 34km in Sensing Length

Vector Brillouin optical time-domain analysis with Raman amplification and optical pulse coding

Chaos Raman distributed optical fiber sensing

364 km ultra-long Raman fiber laser based on high-order pumping and ultra-low-loss fiber

Towards optimal conversion efficiency of Brillouin random fiber lasers in a half-open linear cavity

Broadband high-sensitivity acoustic sensing based on Brillouin random fiber laser

High-Power Random Raman Fiber Laser With an Ultrashort Random Fiber Grating