Abstract:Optical fibre sensors based on Brillouin scattering have been vigorously studied in the context of structural health monitoring on account of their capacity for distributed strain and temperature measurements. However, real-time distributed strain measurement has been achieved only for two-end-access systems; such systems reduce the degree of freedom in embedding the sensors into structures, and furthermore render the measurement no longer feasible when extremely high loss or breakage occurs at a point along the sensing fibre. Here, we demonstrate real-time distributed measurement with an intrinsically one-end-access reflectometry configuration by using a correlation-domain technique. In this method, the Brillouin gain spectrum is obtained at high speed using a voltage-controlled oscillator, and the Brillouin frequency shift is converted into a phase delay of a synchronous sinusoidal waveform; the phase delay is subsequently converted into a voltage, which can be directly measured. When a single-point measurement is performed at an arbitrary position, a strain sampling rate of up to 100 kHz is experimentally verified by detecting locally applied dynamic strain at 1 kHz. When distributed measurements are performed at 100 points with 10 times averaging, a repetition rate of 100 Hz is verified by tracking a mechanical wave propagating along the fibre. Some drawbacks of this ultrahigh-speed configuration, including the reduced measurement accuracy, lowered spatial resolution and limited strain dynamic range, are also discussed.

Design and Realization of Briliouin Optical Time Domain Reflectometer with 34km in Sensing Length

Study on the Technique of Brillouin Scattering Distributed Optical Fiber SensingBased on Optical Interferometric Heterodyne Detection

Brillouin Optical Time Domain Reflectometry Using a Reference Brillouin Ring Laser

Ultrahigh-speed distributed Brillouin reflectometry

Bi-Directional Brillouin Optical Time Domain Analyzer System for Long Range Distributed Sensing

A Wavelength-Scanning Brillouin Optical Time Domain Reflectometer

Distributed Fiber Strain and Vibration Sensor Based on Brillouin Optical Time-Domain Reflectometry and Polarization Optical Time-Domain Reflectometry.

Vector Brillouin optical time-domain analysis with Raman amplification and optical pulse coding

Research on Long Distance Distributed Monitoring Network Technique Based on Brillouin Scattering

Optical Signal Processing in Brillouin Optical Time Domain Reflector Based Morlet Wavelet Transform

High-Performance Distributed Brillouin Optical Fiber Sensing

High-Resolution Distributed Optical-Fiber Sensing Techology Based on Direct-Detecting Coherent Optical Time-Domain Reflectometer

Spatial-division Multiplexed Brillouin Distributed Sensing Based on a Heterogeneous Multicore Fiber

Distributed optical fiber sensing based on the combination of Brillouin and Rayleigh scattering

100 Km Brillouin Optical Time-Domain Reflectometer Based on Unidirectionally Pumped Raman Amplification

Applying Brillouin health monitoring network for civil engineering

Brillouin Optical Time Domain Analysis Incorporating with Backward Rayleigh Light Detection.

Modulated Pulses Based High Spatial Resolution Distributed Fiber System for Multi-Parameter Sensing

Simplified single-end Rayleigh and Brillouin hybrid distributed fiber-optic sensing system

Non-Step-Scanning Rayleigh–Brillouin Distributed Fiber-Optic Sensing System Utilizing Double Sideband Modulation

Multi-parameter distributed fiber sensing system based on hybrid Rayleigh and Brillouin scattering