Abstract:A high-precision distributed time delay measurement in a chirped pulse phase optical time domain reflectometry (CP φ-OTDR) system based on a random fiber grating array is proposed and demonstrated, in which a temperature-induced refractive index and fiber dimension change associated time delay could be measured for distributed temperature sensing. The random fiber grating array includes many inscribed refractive index change locations at periods of sub-micron. When laser pulses are launched into the fiber grating, the backscattered light possesses many unique localized speckle patterns at different locations. These patterns change with temperature, and hence the backscattering spectral response will change accordingly. By measuring the localized speckle pattern change due to the change of the temperature over the chirped pulse spectrum and performing cross-correlation calculation, we can realize distributed temperature measurements in real time using a megahertz bandwidth distributed feedback laser. Unlike a conventional φ-OTDR sensing system which measures a distributed phase change along the fiber using an ultra-narrow linewidth laser, the distributed time delay presented in this Letter is directly measured in real time. It is shown that the time-resolved localized pattern trace is stable with very small fluctuation, thanks to the enhanced inhomogeneity and reflectivity. The minimum detectable temperature variation is about 0.028°C at meter order of magnitude spatial resolution.

Low-Loss Random Fiber Gratings Made With an fs-IR Laser for Distributed Fiber Sensing

Long-distance Fiber-Optic Point-Sensing Systems Based on Random Fiber Lasers.

Reel-to-Reel Fabrication of In-Fiber Low-Loss and High-Temperature Stable Rayleigh Scattering Centers for Distributed Sensing

Design of data acquisition system for distributed optical fiber sensor

Multiplexable High-Temperature Stable and Low-Loss Intrinsic Fabry-Perot In-Fiber Sensors Through Nanograting Engineering

Femtosecond Laser Fabrication of Nanograting-Based Distributed Fiber Sensors for Extreme Environmental Applications

Investigation on Distributed Optical Fiber Sensor Based on Identical-Low-Reflective Fiber Gratings

Long-Period Fiber Gratings For Low-Cost Sensing

Optical fiber random grating-based multiparameter sensor.

Distributed Time Delay Sensing in a Random Fiber Grating Array Based on Chirped Pulse Φ-Otdr.

Ultrafast Laser Processing of Optical Fibers for Sensing Applications.

Wideband Remote-Sensing Based on Random Fiber Laser

Random fiber laser based on a partial-reflection random fiber grating for high temperature sensing

Sub-MHz Ultrasonic Sensor Using Fiber Laser Based on Random Fiber Grating

Optimized femtosecond laser direct-written fiber Bragg gratings with high reflectivity and low loss

Femtosecond Laser Inscribed Small-Period Long-Period Fiber Gratings With Dual-Parameter Sensing

High-Power Random Raman Fiber Laser With an Ultrashort Random Fiber Grating

In-Fiber Grating Fabricated by Femtosecond Laser Direct Writing for Strain Sensing

Novel long-distance fiber-optic sensing systems based on random fiber lasers

Long-distance Random Fiber Laser Sensing System with Wide Sensing Bandwidth