Abstract:Type II fiber Bragg gratings (FBGs) inscribed with femtosecond (fs) laser possess significant potential for high temperature sensing. In this work, we propose and demonstrate a method for fabricating a parallel-integrated ultra-short type II FBG (PI-US-FBG) by using an fs laser point-by-point technology. The PI-US-FBG, featuring by an ultra-short grating length of 80 m, consists of six identical FBGs parallel-inscribed into a fiber core at different radial positions in the same cross section. The fabricated PI-US-FBG exhibits a broadband Gaussian-shape spectrum with a low reflectivity of 10, an ultra-low out-of-band insertion loss of 0.01 dB, and a large full width at half maximum bandwidth of 9.4 nm. Moreover, this PI-US-FBG could be used as a high temperature sensor with a wide measurement range from 25 to 1000 C, and an excellent linearity was achieved with a dual-wavelength differential detection. The temperature sensitivity could be increased from 0.00316 to 0.00945 (dB C) by enlarging the wavelength spacing of the tunable laser. In addition, two cascaded PI-US-FBGs were used to precisely measure the temperature field distribution in a CO2 laser spot with a very high spatial resolution of 100 m. Hence, the proposed PI-US-FBGs could be used for a large-scale fiber sensor network, especially in future distributed temperature measurement with a high spatial resolution.

Random fiber laser based on a partial-reflection random fiber grating for high temperature sensing

High-Power Random Raman Fiber Laser With an Ultrashort Random Fiber Grating

Long-distance Fiber-Optic Point-Sensing Systems Based on Random Fiber Lasers.

Femtosecond Laser Inscribed Multiple In-Fiber Reflection Mirrors for High-Temperature Sensing

Single-frequency random distributed Bragg reflector fiber laser

Low-Loss Random Fiber Gratings Made With an fs-IR Laser for Distributed Fiber Sensing

Remote high temperature sensing with a reflective bandpass long-period fiber grating and a fiber ring laser

Refractive-index-modified-dot Fabry-Perot fiber probe fabricated by femtosecond laser for high-temperature sensing

Multiplexable High-Temperature Stable and Low-Loss Intrinsic Fabry-Perot In-Fiber Sensors Through Nanograting Engineering

High Temperature-Sensitivity Sensor Based On Long Period Fiber Grating Inscribed With Femtosecond Laser Transversal-Scanning Method

High-Efficiency Random Fiber Laser Based on Strong Random Fiber Grating for MHz Ultrasonic Sensing

Temperature-insensitive refractive index sensor based on high-order-resonance short-line long-period fiber grating

Femtosecond laser pulses induced ultra-long-period fiber gratings for simultaneous measurement of high temperature and refractive index

High-Spatial-Resolution High-Temperature Sensor Based on Ultra-Short Fiber Bragg Gratings With Dual-Wavelength Differential Detection

Long-Period Fiber Grating Based High Temperature Sensor

Enhanced Raman Distributed Temperature Sensor Using a High Raman Gain Fiber

High temperature microstructured fiber sensor based on a partial-reflection-enabled intrinsic Fabry-Perot interferometer.

Reel-to-Reel Fabrication of In-Fiber Low-Loss and High-Temperature Stable Rayleigh Scattering Centers for Distributed Sensing

Fiber laser based on a fiber Bragg grating and its application in high-temperature sensing

Multi-wavelength random fiber laser based on a tilted parallel inscribed apodized fiber Bragg grating array

High-resolution Temperature Fiber Ring Laser Sensor Based on Relative Intensity Noise Measurement