Abstract:The Central Solenoid Model Coil (CSMC) project of China Fusion Engineering Test Reactor (CFETR) was developed from 2014 at the Institute of Plasma and Physics Chinese Academy of Sciences (ASIPP) to verify the larger-scale superconducting magnet technology. The short twist pitch (STP) option was chosen for Nb3Sn Cable-In-Conduit Conductors (CICC) due to the stronger rigidity which can withstand the higher electromagnetic (EM) cycles effectively. Performance measurement of conductor short samples in SULTAN facility is the most important assessment method. This paper introduces the Nb3Sn strand parameters and CICC design firstly; then the preparation and measurement procedure of conductor short samples for current sharing temperature (T-cs) are described; subsequently, the T-cs vs. cycles, effective strain (epsilon(eff)) with B x I and transition broadness characteristics compared with strands are assessed qualitatively by power law model. The assessment result shows that the DC performance vs. cycles of the STP design for Nb3Sn CICC is very stable and no degradation. The notable result gives the confidence that life period in the CSMC can be achieved reliably although the number of the EM cycles has been limited to below 10 000 in the measurement. The successful DC performance testing of Nb3Sn CICC will be an important milestone for CSMC project. Lastly, the performance assessment in coil is performed at the typical test waveform. The minimum temperature margin (T-mag) of 0.14 K and electric field of 5 uV/m are achieved respectively. Some slow EM cycles is required to decrease the coupling loss deposition before coil testing.

Test Results of the Model Coil for the 40 T Hybrid Magnet Superconducting Outsert

Fabrication Technique of the Model Coil for the 40-T Hybrid Magnet Superconducting Outsert

Thermal Performance Simulation of a Model Coil for a 40-T Hybrid Magnet

The cryogenic experiment for the Nb3Sn CICC model coil and the analysis of its strain test results

Winding R&D for CFETR Central Solenoid Model Coil

Mechanical performance evaluation of the CFETR central solenoid model coil design

Characterization Of Nb3sn Strands For A 40-T Hybrid Magnetic Model Coil

Winding Design for CFETR Central Solenoid Model Coil

Design and Preliminary Tests of a 20-T REBCO Insert Coil for a 35-T All Superconducting Magnet

Development and Test Results of a Full-Size Joint Sample for the CFETR Central Solenoid Model Coil

Cable-in-Conduit Conductor Fabrication for the Hybrid Magnet of CHMFL

Fabrication Progress of the Outsert Coils of the Series-Connected Hybrid Magnets

Manufacture and Test of a Prototype Nb3Sn-NbTi Joint Sample for the CFETR Central Solenoid Model Coil

Manufacturing Status of CFETR Central Solenoid Model Coil

DC Performance Measurement and Assessment of Nb 3 Sn Cable-In-Conduit Conductor for CFETR CS Model Coil

Characterization of $\hbox{Nb}_{3}\hbox{Sn}$ Strands for a 40-T Hybrid Magnetic Model Coil

Development of a Bi-2212 Solenoid Insert Coil in a 12 T Superconducting Magnet

Heat Treatment And Characterization Of Nb3sn Strands For The Model Coil Of The 40-T Hybrid Magnet

Status of Winding and Forming Technology Development for CFETR CSMC

Construction of Cryostat Components for the CHMFL Hybrid Magnet Superconducting Outsert

Manufacture and Performance Test Result of a 95 Ka-Class Nbti Cable-in-Conduit Conductor for the Low Field Winding-Package of Cfetr-Tf Coil