Abstract:A 25 T cryogen-free superconducting magnet (25T-CSM) was developed and installed at the High Field Laboratory for Superconducting Materials (HFLSM), IMR, Tohoku University. The 25T-CSM consists of a high-temperature superconducting (HTS) coil and a low-temperature superconducting (LTS) coil. A high-strength CuNb/Nb3Sn Rutherford cable with a reinforcing stabilizer CuNb composite is adopted for the middle LTS section coil. All the coils were impregnated using an epoxy resin for conduction cooling. Initially, a GdBa2Cu3O y (Gd123) coil was designed as the HTS insert coil, and then a Bi2Sr2Ca2Cu3O y (Bi2223) coil was also developed. The HTS insert and the LTS (CuNb/Nb3Sn and NbTi) outsert coils are cooled by two 4K GM and two GM/JT cryocoolers, respectively. The LTS coils successfully generated a central magnetic field of 14 T at an operating current of 854 A without any training quench. The Gd123 coil generated 10.15 T at an operating current of 132.6 A in the absence of a background field. Subsequently, the operating current of the Gd123 insert was increased in a step-by-step manner under a background field of 14 T. The Gd123 coil could be operated up to 124.0 A stably, which corresponds to 23.55 T, but quenched at around 124.6 A (23.61 T). The Bi2223 insert coil using a Ni-alloy reinforced Bi2223 tape successfully generated 11.48 T at an operation current of 204.7A in a stand-alone test and 24.57 T in a background field of 14 T. The differences between the calculated and the measured values of the central magnetic fields are about 0.4 T for the Gd123 insert and 0.1 T for the Bi2223 insert around 24 T.

Construction of Cryostat Components for the CHMFL Hybrid Magnet Superconducting Outsert

Cable-in-Conduit Conductor Fabrication for the Hybrid Magnet of CHMFL

The cryogenic experiment for the Nb3Sn CICC model coil and the analysis of its strain test results

Operation of the Helium Cryogenic System for the Hybrid Superconducting Outsert at CHMFL

Fabrication Technique of the Model Coil for the 40-T Hybrid Magnet Superconducting Outsert

A Superconducting Magnet with Center Field of 10 T and Φ100 Mm Warm Bore

Electromagnetic, stress and thermal analysis of the Superconducting Magnet

Development of YBCO Insert for a 25 T All Superconducting Magnet

Cryostat for HECRAL Superconducting Magnet

Thermal Performance Simulation of a Model Coil for a 40-T Hybrid Magnet

Design of a 15 T Hybrid Superconducting Magnet

Design, Development and Fabrication for BESIII Superconducting Muon Detector Solenoid

Test Results of the Model Coil for the 40 T Hybrid Magnet Superconducting Outsert

Fabrication Progress of the Outsert Coils of the Series-Connected Hybrid Magnets

Design of Superconducting Magnet for Background Magnetic Field

Design and Fabrication of a Cross-Warm-Bore Split-Gap Superconducting Magnet System

FABRICATION OF A CONDUCTION COOLED SUPERCONDUCTING MAGNET FOR THE SOLIDIFICATION OF HIGH-ENTROPY ALLOYS

Development Of High Magnetic Field Superconducting Magnet Technology And Applications In China

Characterization Of Nb3sn Strands For A 40-T Hybrid Magnetic Model Coil

Progress in the Development of the Wuhan High Magnetic Field Center

First performance test of a 25 T cryogen-free superconducting magnet