Abstract:The characteristics of a novel atmospheric plasma source generated by a dc double-anode plasma torch have been investigated by measuring its emission spectra and heat flux. The original plasma torch design has been proven to be effective in enhancing the aerodynamic stability and luminous intensity of the plasma arc, as well as the jet length. As an application, a vitrification process based on the double-arc argon plasma has been employed to convert toxic incinerator fly ash into a harmless, stable, and chemical durable product. The vitrified slag exhibits a homogeneous, highly dense, and amorphous glassy structure, which is further confirmed by scanning electron microscopy and X-ray diffraction. The leaching concentrations of the target heavy metals in the slag are decreased significantly and are much lower than the current regulatory thresholds of China and U.S., which reveals that the contaminants have been sufficiently immobilized in the silicate network matrix. It is also determined that the vitrification contributes to the predominant reduction of the specific surface area of the fly ash and to the improvement of the slag hardness. Furthermore, the total concentrations of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) are also appreciably reduced through the plasma vitrification process with a high decomposition rate of 99.97% in PCDD/Fs and 99.94% in I-TEQ. These results indicate that the vitrified product with good quality has great potential to be used as a viable alternative for construction or geotechnical applications. The vitrification process based on the double-arc plasma technology has been demonstrated to be effective and reliable for the stabilization, detoxification, and recycling of waste incinerator fly ash.

Removal of PCDD/Fs from fly ash using reverse vortex plasma

The Degradation of PCDD/Fs in Fly Ash Using Dielectric Barrier Discharge in a Lab-Scale Reactor

Degradation of PCDD/Fs in Fly Ash by Vortex-shaped Gliding Arc Plasma

Degradation of Dioxins in Chelated Municipal Solid Waste Incineration Fly Ash by Low-Temperature Pyrolysis

Application of Non-Thermal Plasmas on Toxic Removal of Dioxin-Contained Fly Ash

Detoxifying PCDD/Fs and heavy metals in fly ash from medical waste incinerators with a DC double are plasma torch

Thermal removal of PCDD/Fs from medical waste incineration fly ash--effect of temperature and nitrogen flow rate.

Effect of fly ash characteristics and ozone on dioxin destruction by gliding arc in tornado plasma

Hydrothermal Decomposition of Polychlorinated Divenzo-p-dioxins and Dibenzofurans in Fly Ash of Medical Waste Incinerator

Inﬂuence of Temperature and Atmosphere on Polychlorinated Dibenzo-P-dioxins and Dibenzofurans Desorption from Waste Incineration Fly Ash.

Destruction of inorganic municipal solid waste incinerator fly ash in a DC arc plasma furnace

Study on Simultaneous Decomposition of PAHs and Dioxins in Municipal Solid Waste Fly Ashes by Pulse Corona Discharge

[Thermal Treatment Behavior of PCDD/Fs on the Fly Ash from Medical Waste Incineration].

Degradation of PCDD/Fs in MSWI Fly Ash Using a Microwave-Assisted Hydrothermal Process

DECOMPOSITION CHARACTERISTICS OF PCDD/Fs DURING MELTING PROCESS OF MUNICIPAL SOLID WASTE INCINERATOR FLY ASH

DC Arc Plasma Furnace Melting of Waste Incinerator Fly Ash

Experimental Study on Thermal Treatment of Dioxins in Fly Ash from Medical Waste Incinerator

Pulse Discharge Effect on Detoxication of Dioxin in Fly Ash

Mechanochemical Degradation of Ocdd/Ocdf in Fly Ash from Medical Waste Incinerators

Diagnostic Of Novel Atmospheric Plasma Source And Its Application To Vitrification Of Waste Incinerator Fly Ash

Characterization of Dioxins and Heavy Metals in Chelated Fly Ash