Influence of Temperature and Atmosphere on Polychlorinated Dibenzo-P-dioxins and Dibenzofurans Desorption from Waste Incineration Fly Ash.

Jie Yang,Mi Yan,Xiaodong Li,Tong Chen,Shengyong Lu,Jianhua Yan,Alfons Buekens
DOI: https://doi.org/10.1080/09593330.2014.960480
IF: 3.475
2014-01-01
Environmental Technology
Abstract:A fly ash sample was heated for 1 h to 200 degrees C, 300 degrees C and 400 degrees C, in order to study the influence of temperature and gas phase composition on the removal of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) from fly ash derived from municipal solid waste incineration. The tests were conducted by treating a fixed bed of fly ash both in an inert (nitrogen) and in a reducing (nitrogen + hydrogen) gas flow in a horizontal bench-scale quartz tubular reactor, heated by a surrounding tubular furnace. The results indicate that most of the PCDD/Fs in fly ash were removed by thermal treatment, especially when the temperature was higher than 300 degrees C: the PCDD/Fs' removal efficiency attained up to 96%. PCDD/Fs dechlorination and destruction were much more important than PCDD/Fs desorption, under either inert or reducing atmosphere. At 200 degrees C and 300 degrees C, the experiments with reducing atmosphere yielded slightly better results than those in nitrogen; yet, this tendency was reversed at 400 degrees C. In general, both treatment modes can fully meet the requirements regarding the concentration of dioxins in fly ash to be sent for landfill in China.
What problem does this paper attempt to address?