Abstract:Degradation of polychlorinated dibenzo- p-dioxins and dibenzofurans in municipal solid waste incinerator fly ash is beneficial to its risk control. Fly ash was treated in a full-scale thermal degradation system (capacity 1 t d-1) to remove polychlorinated dibenzo- p-dioxins and dibenzofurans. Apart from the confirmation of the polychlorinated dibenzo- p-dioxin and dibenzofuran decomposition efficiency, we focused on two major issues that are the major obstacles for commercialising this decomposition technology in China, desorption and regeneration of dioxins and control of secondary air pollution. The toxic equivalent quantity values of polychlorinated dibenzo- p-dioxins and dibenzofurans decreased to <6 ng kg-1 and the detoxification rate was ⩾97% after treatment for 1 h at 400 °C under oxygen-deficient conditions. About 8.49% of the polychlorinated dibenzo- p-dioxins and dibenzofurans in toxic equivalent quantity (TEQ) of the original fly ash were desorbed or regenerated. The extreme high polychlorinated dibenzo- p-dioxin and dibenzofuran levels and dibenzo- p-dioxin and dibenzofuran congener profiles in the dust of the flue gas showed that desorption was the main reason, rather than de novo synthesis of polychlorinated dibenzo- p-dioxins and dibenzofurans in the exhaust pipe. Degradation furnace flue gas was introduced to the municipal solid waste incinerator economiser, and then co-processed in the air pollution control system. The degradation furnace released relatively large amounts of cadmium, lead and polychlorinated dibenzo- p-dioxins and dibenzofurans compared with the municipal solid waste incinerator, but the amounts emitted to the atmosphere did not exceed the Chinese national emission limits. Thermal degradation can therefore be used as a polychlorinated dibenzo- p-dioxin and dibenzofuran abatement method for municipal solid waste incinerator source in China.

Pulse Discharge Effect on Detoxication of Dioxin in Fly Ash

The Degradation of PCDD/Fs in Fly Ash Using Dielectric Barrier Discharge in a Lab-Scale Reactor

Application of Non-Thermal Plasmas on Toxic Removal of Dioxin-Contained Fly Ash

Study on Simultaneous Decomposition of PAHs and Dioxins in Municipal Solid Waste Fly Ashes by Pulse Corona Discharge

Characterization of Dioxins and Heavy Metals in Chelated Fly Ash

Degradation of Dioxins in Chelated Municipal Solid Waste Incineration Fly Ash by Low-Temperature Pyrolysis

Removal of PCDD/Fs from fly ash using reverse vortex plasma

Mechanochemical Degradation of Ocdd/Ocdf in Fly Ash from Medical Waste Incinerators

Detoxifying PCDD/Fs and heavy metals in fly ash from medical waste incinerators with a DC double are plasma torch

Trace Pollutant in MSW Incinerator Fly Ash:Heavy Metals and Dioxins

Effect of fly ash characteristics and ozone on dioxin destruction by gliding arc in tornado plasma

Inﬂuence of Temperature and Atmosphere on Polychlorinated Dibenzo-P-dioxins and Dibenzofurans Desorption from Waste Incineration Fly Ash.

DECOMPOSITION CHARACTERISTICS OF PCDD/Fs DURING MELTING PROCESS OF MUNICIPAL SOLID WASTE INCINERATOR FLY ASH

The Effect of Adjusting Sinter Raw Mix on Dioxins from Iron Ore Co-Sintering with Municipal Solid Waste Incineration Fly Ash

A full-scale study on thermal degradation of polychlorinated dibenzo- p-dioxins and dibenzofurans in municipal solid waste incinerator fly ash and its secondary air pollution control in China

Effect of supercritical water oxidation onthe PCDD/FS and heavy metals in incineration fly ash

Removal Characteristics of PCDD/Fs by an Adsorbent Injection Coupled with a Baghouse Filter System

Dioxins Reformation and Destruction in Secondary Copper Smelting Fly Ash under Ball Milling

Low-temperature thermal treatment of dioxin in medical waste fly ash under unert atmosphere]

Degradation technologies and mechanisms of dioxins in municipal solid waste incineration fly ash: A review

Destruction of inorganic municipal solid waste incinerator fly ash in a DC arc plasma furnace