Abstract:Vibration measurement is a frequent measurement requirement in a number of areas. Optical vibration sensors have many advantages over electrical counterparts. A common approach is to optically detect the vibration induced mechanical movement of a cantilever. Nevertheless, their practical applications are hindered by the cross-sensitivity of temperature and dynamic instability of the mechanical structure, which lead to unreliable vibration measurements. Here, we demonstrate a temperature insensitive vibration sensor that involves an enclosed suspended cantilever integrated with a readout fiber, providing in-line measurement of vibration. The cantilever is fabricated from a highly birefringent photonic crystal fiber by chemical etching and fused to a single-polarization fiber. Mechanical vibration induced periodic bending of the cantilever can significantly modify the state of polarization of the light that propagates along the photonic crystal fiber. The single-polarization fiber finally converts the state of polarization fluctuation into the change of output optical power. Therefore, the vibration could be demodulated by monitoring the output power of the proposed structure. Due to the special design of the structure, the polarization fluctuation induced by a variation of the ambient temperature can be significantly suppressed. The sensor has a linear response over the frequency range of 5 Hz to 5 kHz with a maximum signal-to-noise ratio of 60 dB and is nearly temperature independent. (C) 2022 Optica Publishing Group

All-Fiber Vibration Sensor Based on Nano-Wire Grid Polarizer

A Transflective Nano-Wire Grid Polarizer Based Fiber-Optic Sensor

A Heterodyne Optical Fiber Current Sensor Based on a Nanowire-Grid In-Line Polarizer

Highly Sensitive and Fast Response Strain Sensor Based on Evanescently Coupled Micro/nanofibers

Temperature-insensitive polarimetric vibration sensor

Fiber Grating Sensor Using Dynamic PZT Modulation

High-Sensitivity Microfiber Strain and Force Sensors

All-Fiber Strain Sensor Based on Dual Side V-Grooved Long-Period Fiber Grating

A Fiber Bragg Grating Sensing-Based Micro-Vibration Sensor and Its Application

FFT Algorithm-Assisted Polarimetric Twist Sensor

Fiber Optic All-Polarization Weak Magnetic Field Sensor Based on Sagnac Interferometer

A New Type of Dynamic Vibration Fiber Sensor

Sub-Nanometer Acoustic Vibration Sensing Using a Tapered-Tip Optical Fiber Microcantilever

High-sensitivity and Real-Time Displacement Sensor Based on Polarization Properties in Fiber

A Vibration Sensor Based on Fiber Bragg Grating Fabry-Perot Cavity

A fiber Bragg grating interrogating dynamic strains sensor system based on interference of polarized mode

Acoustic Vibration Sensor Based on Nonadiabatic Tapered Fibers

Single-polarization Microfiber and Resonator for Sensing Applications

Optical Fiber Low-Frequency Vibration Sensor Based on Butterfly-Shape Mach-Zehnder Interferometer

Flexible Optical Fiber Fabry–Perot Interferometer Based Acoustic and Mechanical Vibration Sensor

Polarizing Grating-Based Ultrasensitive All-Fiber Angular Displacement Sensor