Abstract:The propagation of light from a singlemode fiber (SMF) to a multimode fiber (MMF) arouses a series of eigenmodes, which interference together along the MMF where the positions of the local maximum intensity are the self-imaging points (SIPS). When the light in the MMF propagates to a SMF, the maximum coupling efficiency is obtain when the SMF and MMF connect at a SIP. However the connection generally deviates the SIPs for the accurate connection is difficult to be achieved, which decreases the accuracy of the sensor severely. Herein a novel vibration sensor based on the singlemode multimode singlemode (SMS) fiber is developed, in which the MMF is etched, which turns the SIP to the connection of the MMF and the output SMF accurately. The etched SMS structure dispenses with the requirement of highly accurate connection at a SIP and provides a succedaneous scheme that is sensitive to vibration. The etched sensor responses to the vibration more easily comparing to the un-etched one. Experimental results demonstrate that the sensitivity of the SMS sensor with the both ends etched is respectively over 5 and 40 times as that of the middle etched and un-etched one. When the MMF length decreases from 8 to 2 cm, the vibrating sensitivity of the sensor increases 13.5 times. Experimental results demonstrate that the etched structure with MMF length of 2 cm responses well to the acoustic wave from 20 to 300 Hz, where a pressure sensitivity of 1.49 mV/mPa and linear correlation index of 0.9980 can be attained at 120 Hz. (C) 2018 Elsevier B.V. All rights reserved.

Optical Fiber Low-Frequency Vibration Sensor Based on Butterfly-Shape Mach-Zehnder Interferometer

Highly Sensitive Displacement Sensor Based on Composite Interference Established Within a Balloon-Shaped Bent Multimode Fiber Structure.

A Reliable Anti-Interference Temperature Sensor Based on a Four-Hole Microstructure Optical Fiber Mach-Zehnder Interferometer.

Highly Compact Vector Bending Sensor With Microfiber-Assisted Mach– Zehnder Interferometer

A Hybrid Single-End-access MZI and Φ-OTDR Vibration Sensing System with High Frequency Response

Vibration Sensor Based on Hollow Biconical Fiber

Flexible Optical Fiber Fabry–Perot Interferometer Based Acoustic and Mechanical Vibration Sensor

High Sensitivity Strain Sensor Based on a Novel Offset-Core Single Micro-Tapered Fiber-Optic Mach-Zehnder Interferometer

A dynamic spectral demodulation scheme of the fiber optical Fabry-Perot sensor for low-frequency vibration detection

Acoustic Frequency Vibration Sensor Based on Tapered SMS Fiber Structure

High Sensitivity and Low Temperature Cross-Talk Magnetic Field Sensor with Ferrofluid-Filled In-Fiber Mach-Zehnder Interferometer

High Sensitivity Fiber-Optic Strain Sensor Based on Modified Microfiber-Assisted Open-Cavity Mach-Zehnder Interferometer

Fiber-Optic Vibration Sensor Based on Beat Frequency and Frequency-Modulation Demodulation Techniques

Acoustic Vibration Sensor Based on Nonadiabatic Tapered Fibers

A Novel MZI Fiber Sensor with Enhanced Curvature and Strain Sensitivity Based on Four-Core Fiber

Ultrasensitive Strain Sensor Based on Mach-Zehnder Interferometer with Bent Structures

An All Fiber Mach-Zehnder Interferometer Based on Tapering Core-Offset Joint for Strain Sensing

Highly Sensitive and Regulatable Optical Fiber Vernier Sensor Based on Two Integrated Parallel MZIs

Highly sensitive strain sensor based on helical structure combined with Mach-Zehnder interferometer in multicore fiber

Temperature-Insensitive Fiber Cantilever Vibration Sensor Based on A Fiber-To-Fiber Structure

In-fiber torsion sensor based on dual polarized Mach-Zehnder interference