Abstract:The propagation of light from a singlemode fiber (SMF) to a multimode fiber (MMF) arouses a series of eigenmodes, which interference together along the MMF where the positions of the local maximum intensity are the self-imaging points (SIPS). When the light in the MMF propagates to a SMF, the maximum coupling efficiency is obtain when the SMF and MMF connect at a SIP. However the connection generally deviates the SIPs for the accurate connection is difficult to be achieved, which decreases the accuracy of the sensor severely. Herein a novel vibration sensor based on the singlemode multimode singlemode (SMS) fiber is developed, in which the MMF is etched, which turns the SIP to the connection of the MMF and the output SMF accurately. The etched SMS structure dispenses with the requirement of highly accurate connection at a SIP and provides a succedaneous scheme that is sensitive to vibration. The etched sensor responses to the vibration more easily comparing to the un-etched one. Experimental results demonstrate that the sensitivity of the SMS sensor with the both ends etched is respectively over 5 and 40 times as that of the middle etched and un-etched one. When the MMF length decreases from 8 to 2 cm, the vibrating sensitivity of the sensor increases 13.5 times. Experimental results demonstrate that the etched structure with MMF length of 2 cm responses well to the acoustic wave from 20 to 300 Hz, where a pressure sensitivity of 1.49 mV/mPa and linear correlation index of 0.9980 can be attained at 120 Hz. (C) 2018 Elsevier B.V. All rights reserved.

A dynamic spectral demodulation scheme of the fiber optical Fabry-Perot sensor for low-frequency vibration detection

Pattern Recognition Based on Enhanced Multifeature Parameters for Vibration Events in Φ‐otdr Distributed Optical Fiber Sensing System

A Novel Demodulation Scheme of Fiber-Optic Interferometric Sensor Based on FM SSB Signal

Fiber-Optic Vibration Sensor Based on Beat Frequency and Frequency-Modulation Demodulation Techniques

Flexible Optical Fiber Fabry–Perot Interferometer Based Acoustic and Mechanical Vibration Sensor

Low-Frequency Vibration Sensor with Dual-Fiber Fabry–Perot Interferometer Using a Low-Coherence LED

An Optical Orthogonal Heterodyne Demodulation Technology for Interferometric Fiber-optic Sensor

A Vibration Sensor Based on Fiber Bragg Grating Fabry-Perot Cavity

Non-contact Fiber Vibration Sensor based on Intracavity Modulation of an Extrinsic Fabry-Perot Interferometer

Dynamic Demodulation of Low-Finesse Fabry-Perot Sensors Based on Instantaneous Frequency Analysis

High-speed spectrum demodulation of fiber-optic Fabry–Perot sensor based on scanning laser

Acoustic Vibration Sensor Based on Nonadiabatic Tapered Fibers

Optical Fiber Low-Frequency Vibration Sensor Based on Butterfly-Shape Mach-Zehnder Interferometer

Vibration Measurement of Smart Composite Structures by Using the New Intensity Modulated Optical Fiber Sensor

Distributed Temperature/Vibration Fiber Optic Sensor With High Precision and Wide Bandwidth

Low-frequency vibration measurement by a dual-frequency DBR fiber laser

Dynamic Phase Extraction in an Ameliorated Distributed Vibration Sensor Using a Highly Stable Homodyne Detection

Fast interrogation of dynamic low‐finesse Fabry‐Perot interferometers: A review

Distributed Single Fiber Optic Vibration Sensing with High Frequency Response and Multi-Points Accurate Location

Acoustic Frequency Vibration Sensor Based on Tapered SMS Fiber Structure

High-sensitivity fiber-optic low-frequency acoustic detector based on cross-correlation demodulation