Abstract:A compact and low-power consuming fiber-optic anemometer based on single-walled carbon nanotubes (SWCNTs) coated tilted fiber Bragg grating (TFBG) is presented. TFBG as a near infrared in-fiber sensing element is able to excite a number of cladding modes and radiation modes in the fiber and effectively couple light in the core to interact with the fiber surrounding mediums. It is an ideal in-fiber device used in a fiber hot-wire anemometer (HWA) as both coupling and sensing elements to simplify the sensing head structure. The fabricated TFBG was immobilized with an SWCNT film on the fiber surface. SWCNTs, a kind of innovative nanomaterial, were utilized as light-heat conversion medium instead of traditional metallic materials, due to its excellent infrared light absorption ability and competitive thermal conductivity. When the SWCNT film strongly absorbs the light in the fiber, the sensor head can be heated and form a "hot wire". As the sensor is put into wind field, the wind will take away the heat on the sensor resulting in a temperature variation that is then accurately measured by the TFBG. Benefited from the high coupling and absorption efficiency, the heating and sensing light source was shared with only one broadband light source (BBS) without any extra pumping laser complicating the system. This not only significantly reduces power consumption, but also simplifies the whole sensing system with lower cost. In experiments, the key parameters of the sensor, such as the film thickness and the inherent angle of the TFBG, were fully investigated. It was demonstrated that, under a very low BBS input power of 9.87 mW, a 0.100 nm wavelength response can still be detected as the wind speed changed from 0 to 2 m/s. In addition, the sensitivity was found to be -0.0346 nm/(m/s) under the wind speed of 1 m/s. The proposed simple and low-power-consumption wind speed sensing system exhibits promising potential for future long-term remote monitoring and on-chip sensing in practical applications.

A Heterodyne Optical Fiber Current Sensor Based on a Nanowire-Grid In-Line Polarizer

A Transflective Nano-Wire Grid Polarizer Based Fiber-Optic Sensor

All-Fiber Vibration Sensor Based on Nano-Wire Grid Polarizer

Microfiber-coupled superconducting nanowire single-photon detector for near-infrared wavelengths.

Microfiber Coupled Superconducting Nanowire Single-Photon Detectors

Design Of Vibration-Insensitive Sagnac Fiber-Optic Current Sensors Using Spun High-Birefringence Fibers

Silicon Photonic Current Sensor Based on Multimode Interference

Mixed-Type Optical Fiber Current Sensor

Application of the wire metal grating in the fiber sensors

A Novel Design of Fiber-Optic Sagnac Current Sensor

Highly Birefringent Optical-Fiberized Slot Waveguide for Miniature Polarimetric Interference Sensors: A Proposal

Polarizer-free Measurement of the Full Stokes Vector Using a Fiber-Coupled Superconducting Nanowire Single Photon Detector with a Polarization Extinction Ratio of ∼2.

When Nanowires Meet Ultrahigh Ferroelectric Field-High-Performance Full-Depleted Nanowire Photodetectors.

A Novel Low-Power-Consumption All-Fiber-Optic Anemometer with Simple System Design

Low-Cost High-Performance Fiber-Optic Ph Sensor Based on Thin-Core Fiber Modal Interferometer

Vibration Immunity Fiber Optic Current Sensor Employing a Spun or Twisted Highly Linear Birefringence Fiber

Optical Fiber-Coupled Waveguide Grating Chip Sensor Fabricated by Ultraviolet Nanoimprint Lithography

Design and simulation analysis of fiber optic current sensor using orbital angular momentum beam

A novel compensation fiber coil for eliminating Sagnac Effect in fiber optic current sensor

Hybrid Si-Au plasmonic sensor on the end-facet of a dual-core optical fiber enhanced by hotspots: a theoretical study

Refractive index and temperature sensors based on no-core fiber cascaded with long period fiber grating