Abstract:Ceramic matrix composites have garnered significant attention in aerospace and other fields due to their outstanding properties. However, as a common and critical defect, density defect often results in non-uniform matrix distribution and internal pore formation, posing a substantial risk to component safety. This paper presents a novel method aimed at deliberately inducing varying degrees of density defects in SiCf/SiC. The feasibility of this method is validated using infrared thermography and computed tomography. As density defects aggravate, the porosity of the sample's defective region gradually increases, with both the number of micropores and the dimensions of larger pores expanding. This trend underscores the decreased compactness of the SiC matrix. Additionally, there is an initial decline in tensile strength followed by stabilization, while the tensile elastic modulus exhibits a continued decrease. The retention rates of the minimum tensile strength and tensile elastic modulus are 83.89 % and 64.77 %, respectively, compared to those of the defect-free samples. In terms of compressive properties, both compressive strength and compressive elastic modulus exhibit progressive decreases, culminating in final retention rates of 76.54 % and 72.02 %, respectively. Density defects reduce the matrix cracking stress and introduce new defects such as delamination, thereby altering the material's damage mechanism. This study provides innovative perspectives for risk assessment and lifespan prediction of density defects, especially concerning more complex components like turbine blades.

Study on the influence of manufacturing defects on coefficient of thermal expansion of plain weave C/SiC

Microstructure Modeling for Prediction of Thermal Conductivity of Plain Weave C/SiC Composites Considering Manufacturing Flaws

Improved Semi-Analytical and Numerical Methods on Prediction of In-Plane Coefficients of Thermal Expansion of Woven Ceramic Matrix Composite Considering Defects

Numerical Evaluation on the Influence of Void Defects and Interphase on the Thermal Expansion Coefficients of Three-Dimensional Woven Carbon/carbon Composites

Effects of Void Defects on Fracture Features and Tensile Strength of C/SiC Composites: an Image-based FEM Study

Numerical computing of effective modulus of woven C/C-SiC composites including porosities and micro-cracks

Pore Evolution and Mechanical Response under Locally Varying Density Defects in Ceramic Matrix Composites

Numerical Prediction of the Effective Coefficient of Thermal Expansion of 3D Braided C/SiC Composite

A multiscale modeling for predicting the thermal expansion behaviors of 3D C/SiC composites considering porosity and fiber volume fraction

Damage Evolution of the Interphase on C/SiC Composites with CZM Method

Thermal Conductivities of Plain Woven C/SiC Composite: Micromechanical Model Considering PyC Interphase Thermal Conductance and Manufacture-Induced Voids

Effect of Porosity on the Tensile Strength and Micromechanisms of Laminated Stitched C/C-SiC Composites

In-plane Thermal Expansion Behavior of M55J Carbon Fiber Reinforced SiC Matrix Composite

Nondestructive investigation of density defect in C/SiCs and its effect on the mechanical properties

The thermo-mechanical coupling failure mechanisms of C/SiC riveted joint considering deposited SiC matrix and interference fit

A method for predicting thermal expansion coefficients of carbon fiber/epoxy composites with void defects

Effect of Manufacturing Defects on Mechanical Properties and Failure Features of 3D Orthogonal Woven C/C Composites

Stress Field and Damage Evolution in C/SiC Woven Composites: Image-Based Finite Element Analysis and in Situ X-Ray Computed Tomography Tests

Internal Damage Evolution Investigation of C/SiC Composites Using In-Situ Tensile X-ray Computed Tomography Testing and Digital Volume Correlation at 1000 °C

Numerical Study on Effective Thermal Conductivities of Plain Woven C/SiC Composites with Considering Pores in Interlaced Woven Yarns

Effect of Manufacturing Defect on Mechanical Performance of Plain Weave Carbon/epoxy Composite Based on 3D Geometrical Reconstruction