Abstract:Fiber reinforced resin matrix composites are more and more widely used in aerospace and automobile manufacturing industries. However, the probability of manufacturing defects in composites is very high due to the complex physical and chemical properties of component materials and molding processes. Therefore, the research on the manufacturing defects and their detection of composites becomes important in evaluating the quality of composites. First, the formation mechanism of residual stresses, void defects and resin-rich defects in the matrix of composites are summarized. Especially, the curing of thermosetting resin and thermoplastic resin, the resin infiltration process in hot pressing, resin transfer molding and 3D printing, and resin-rich defects in molding process are described in this article. Second, the forming mechanism of fiber reinforcement defects such as fiber wrinkle and waviness in composites is introduced, and the influence of such defects on the bending and compression properties of composites is analyzed, which shows that fiber misalignment defects will seriously reduce the modulus, strength and stability of the supporting structures. Third, formation mechanism, damage causes and optimization methods of interfacial defects such as delamination and debonding in the interface between reinforcements and matrix are elaborated. Fourth, machining defects such as drilling and cutting defects are revealed. The main manifestations are delamination, tearing, and burrs, which will seriously affect the strength and reliability of the connection between components. Finally, the non-contact detection of defects in composites are shown in the article. Different detection methods can be used to measure defects of different scales to predict composite damage and life in advance. This review analyzes manufacturing defects in laminated, woven, braided, and additive manufactured composites, and summarizes common defect detection methods, also presents an outlook for composite manufacturing.

Effect of Manufacturing Defect on Mechanical Performance of Plain Weave Carbon/epoxy Composite Based on 3D Geometrical Reconstruction

Understanding the Impact of Fibre Wrinkle Architectures on Composite Laminates Through Tailored Gaps and Overlaps

Effect of Manufacturing Defects on Mechanical Properties and Failure Features of 3D Orthogonal Woven C/C Composites

Interaction of Multiple Micro-Defects on the Strength and Failure Mechanism of UD Composites by Computational Micromechanics

Modeling on the Effect of Automated Fiber Placement Induced Gaps in Curved Composite Laminates

Investigation on the Mechanical Properties of Epoxy Resin with Void Defects Using Digital Image Correlation and Image-Based Finite Element Method

Study of the effect of void defects on the mechanical properties of fiber reinforced composites

Deformation and Fracture Mechanisms of Automated Fiber Placement Pre-Preg Laminates under Out-of-plane Tensile Loading

Effect of Resin-Missing Defects on Tensile Behavior of Carbon Fiber/Epoxy Composites

Micro‐mesoscopic analysis of 3D void formation and evolution in CFRP composite using high‐resolution x‐ray microtomography

Influence of Internal Technological Defects on the Mechanical Properties of Structural CFRP

Damage and Failure Mechanisms of CFRP Due to Manufacturing Induced Wrinkling Defects

A review on manufacturing defects and their detection of fiber reinforced resin matrix composites

A unified trans-scale mechanical properties prediction method of 3D composites with void defects

Experimental and numerical study on the tensile failure behavior of toughened-interlayer composite laminates with automated fiber placement (AFP) induced gap and overlap defects

Critical Void Content for Thermoset Composite Laminates

Effect of Random Void Defects on the Mechanical Behavior of C/C Braided Composites

Effects of defects on laminate quality and mechanical performance in thermoplastic Automated Fiber Placement-based process chains

Effect of void defects on mechanical behavior and failure features of C/C honeycomb structure

A novel numerical simulation method for predicting compressive properties of 3D multiaxial braided composites considering various defects

Parametric analyses on multiscale elastic behavior of 3D braided composites with pore defects