Abstract:<p>The focus of this work is to characterize the progressive damage and failure behavior of 2.5D woven alumina fiber reinforced silica ceramic matrix thin composite specimen under a planar tension-shear stress state. The tensile and shear stress-strain diagrams in the principal material coordinate system were obtained using the off-axis tension test with the digital image correlation technique. A mesoscale finite element model of the composite material was developed within the framework of continuum damage mechanics. The thickness effect on the macroscopic mechanical response was considered by removing the periodic boundary conditions along the thickness direction. The macroscopic stress-strain response given by the numerical model was validated by the experimental results. The interaction of the planar biaxial tension and shear stresses was taken into account in the model, quantified using a shear contribution coefficient in the modified 3D Hashin failure criterion. The results from the damage evolution analysis indicate that the linear tensile stress-strain response with a brittle fracture characteristic for the on-axis tension specimen is governed by the axial fiber bundle. The nonlinear tensile stress-strain response with the significantly reduced ultimate stress under biaxial tension and shear stress state results from multiple damages with evolution in both axial and transverse fiber bundles. Both the effective tensile modulus and the ultimate tensile strength increase with increasing the thickness of the specimen due to the increase of the fiber volume fraction. The strengthening induced by the size effect is less significant for the specimen under biaxial tension and shear stress state than that for the on-axis tension specimen owing to the involvement of shear response dominated by the matrix of the material. The results of this study provide new insight into the failure of 2.5D woven ceramic-based composite material, which contributes to the optimal design of the reusable thermal protection system structure.</p>

Improved Semi-Analytical and Numerical Methods on Prediction of In-Plane Coefficients of Thermal Expansion of Woven Ceramic Matrix Composite Considering Defects

A method for predicting thermal expansion coefficients of carbon fiber/epoxy composites with void defects

A multiscale modeling for predicting the thermal expansion behaviors of 3D C/SiC composites considering porosity and fiber volume fraction

Multi-scale Modeling of Thermal Expansion Coefficients of C/C Composites at High Temperature

A numerical study on the coefficients of thermal expansion of fiber reinforced composite materials

New numerical algorithm for the periodic boundary condition for predicting the coefficients of thermal expansion of composites

Multiscale Numerical Modeling for Thermal Behavior of Plain-Woven Composites with Interfacial and Internal Defects

Finite Element Modeling of 3D Orthogonal Woven C/C Composite Based on Micro-Computed Tomography Experiment

Development and validation of damage and failure models for the design of ceramic matrix composite components

A meso-scale stochastic model for tensile behavior of 2D woven ceramic composites considering void defects and stacking mode

A combined method for analyzing the effective thermal conductivity evolution of satin weave thermoset prepregs during preforming process

Predicting tensile behaviour of plain weave CMCs using a nonlinear data-driven constitutive model for fibre tow composites

A temperature-dependent constitutive model for fiber-reinforced ceramic matrix composites and structural stress analysis

A unified trans-scale mechanical properties prediction method of 3D composites with void defects

Study on mechanical properties and thermal conductivity of 3D short carbon fiber reinforced ultra-high temperature ceramic matrix composites: A novel material performance evaluation model

Experimental and numerical investigation of progressive damage and failure behavior for 2.5D woven alumina fiber/silica matrix composites under a complex in-plane stress state

Multiscale nonlinear analysis of 3D orthogonal woven C/SiC composites based on the CT reconstruction

Modeling Method of C/C-ZrC Composites and Prediction of Equivalent Thermal Conductivity Tensor Based on Asymptotic Homogenization

A new progressive damage model for predicting the tensile behavior of the three-dimensional woven carbon/carbon composites using micromechanics method

EFFECTS OF AS-RECEIVED DEFECTS ON CERAMIC MATRIX COMPOSITES PROPERTIES USING HIGH- FIDELITY MICROSTRUCTURES WITH PERIODIC BOUNDARY CONDITIONS

Multi-scale modeling: Finite element analysis of the thermophysical properties of carbon/carbon composites considering manufacturing defects and porosity at high temperature