Abstract:Aerogel is a kind of high-performance lightweight open-porous solids with ultralow density, high specific surface area, and broad application in many emerging fields including biotechnology, energy, environment, aerospace, etc. A giant challenge remains in preventing of the hydrophilic aerogel framework shrinkage when replacing of solvent with air in its extremely abundant nanosized pores during its fabrication process in ambient conditions. In this work, started from a linear polymeric precursor with further condensation reaction, superhydrophilic silica aerogels with self-reinforced microstructure and the least volume shrinkage have been successfully obtained via ambient pressure drying process without use of any additives in the presence of a low surface tension solvent. The resulting superhydrophilic silica aerogels possess specific surface area up to 1065 m2/g, pore volume up to 2.17 cm3/g and density down to 84 mg/cm3, and these values are comparable to those of their counterparts obtained by supercritical CO2 drying process. Moreover, as an application demonstration, the bioinspired hydrogels with desirable mechanical flexibility and adhesive performance at extremely harsh environment (e.g., below −50 °C) have been successfully synthesized by mimicking carrier of a functional bioagent with the resulting superhydrophilic silica aerogel microparticles. Our work has made a significant step forward for future high-performance hydrophilic aerogels with self-enhanced microstructures and the resulting superhydrophilic aerogels have shown great potentials in making functional hydrogels with bionic properties.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.langmuir.1c00476?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.langmuir.1c00476</a>.Photo images, 1H NMR spectra, LC-MS of T-TEOS and ESOM, N2 absorption–desorption isotherms of the silica aerogels and xerogel, proposed structure of T-TEOS, ESOM, and silica gels, SEM image of silica aerogel derived from T-TEOS and ESOM, photo images of the drying process of the silica aerogel and xerogel, the process of releasing glycerol and absorbing water from silica aerogels, the amount of glycerol released from silica aerogel versus time, theoretical calculation of interaction strength of PVA–PET and PVA–PS, synthetic parameter, physical properties of the silica aerogels and xerogels (<a class="ext-link" href="/doi/suppl/10.1021/acs.langmuir.1c00476/suppl_file/la1c00476_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Clean Synthesis of Silver-Silica Aerogels Via Supercritical Drying and Impregnation

Preparation of Methyltrimethoxysilane Derived Silica Aerogel Films via Ambient Pressure Drying

Preparation of Silica Aerogels Via Ambient Pressure Drying

A Facile Strategy for Freeze-Drying Preparation of Silica Aerogel from Sodium Silicate

Superhydrophobic silica aerogel powders with simultaneous surface modification, solvent exchange and sodium ion removal from hydrogels

Ambient-pressure drying synthesis of large resorcinol–formaldehyde-reinforced silica aerogels with enhanced mechanical strength and superhydrophobicity

Rapid synthesis of sodium silicate based hydrophobic silica aerogel granules with large surface area

Transparent, Ultraflexible, and Superinsulating Nanofibrous Biocomposite Aerogels Via Ambient Pressure Drying

Synthesis and characterization of silica aerogels by a novel fast ambient pressure drying process

Sol-gel Preparation of Ag-silica Nanocomposite with High Electrical Conductivity

Facile Synthesis of Flexible and Hydrophobic Polymethylsilsesquioxane Based Silica Aerogel Via the Co-Precursor Method and Ambient Pressure Drying Technique

In-situ acid catalysis strategy to achieve rapid ambient pressure drying preparation of aerogels

Robust Silica–Agarose Composite Aerogels with Interpenetrating Network Structure by in Situ Sol–Gel Process

Effects of Surfactants on the Synthesis of Silica Aerogels Prepared by Ambient Pressure Drying

Fabrication of Elastic Silica-Bacterial Cellulose Composite Aerogels with Nanoscale Interpenetrating Network by Ultrafast Evaporative Drying

Multiscale Assembly of Superinsulating Silica Aerogels Within Silylated Nanocellulosic Scaffolds: Improved Mechanical Properties Promoted by Nanoscale Chemical Compatibilization

Silica Aerogels with Self-Reinforced Microstructure for Bioinspired Hydrogels

Synthesis of Alumina Aerogels by Ambient Drying Method and Control of Their Structures

Synthesis of high specific surface area silica aerogel from rice husk ash via ambient pressure drying

Silica aerogels formed from soluble silicates and methyl trimethoxysilane (MTMS) using CO2 gas as a gelation agent

Ultrasound‐assisted freeze‐drying strategy to enhance nanoparticle dispersion in aerogels: A case study on polyimide/silica nanocomposite aerogel