Abstract:The measurement of five degrees-of-freedom (5-DOF) error motions, including radial, axial, and tilt motions, is crucial for ultra-precision rotary axes, which are key components of ultra-precision machine tools and instrumentation. In this study, we propose an interference-enhanced micro-vision technique to concurrently derive the 5-DOF error motions from a single-shot two-dimensional image, which was captured by a standard industrial camera equipped with an interference objective lens. By consolidating the essential features into a single optical path, the interference-enhanced micro-vision technique ingeniously merges machine micro-vision and modified white-light interference to detect in-plane and out-of-plane motions. Numerical simulations demonstrated, the basic principle for deriving the 5-DOF error motions, and the magnification of objective lens had inconsistent effects on the measurement accuracy for the radial and tilt motions, i.e. higher magnification led to higher radial accuracy but lower tilt accuracy. As practical application, the error motion detection capability was demonstrated by simultaneously measuring the 5-DOF synchronous and asynchronous error motions for a typical air bearing spindle at rotation speeds of 8.33, 108.33, and 308.33 rpm. The synchronous errors were nearly identical at various spindle speeds. However, because of system dynamics, increased vibrations were observed to be superimposed on the basic tilt error motions as the spindle speeds increased, which were verified by the vibration marks imprinted on the turned surfaces. For the 5-DOF motion measurements, the least-square fitting using large-volume edge and greyscale data of the captured image enabled super-high resolutions, despite using a camera with a relatively large pixel size and low bit depth. These results demonstrate that the proposed interference-enhanced micro-vision technique is a simple and effective tool for measuring spatial error motions in ultra-precision rotary axes.

Real-Time Monitoring Method for Five-Degrees-of-Freedom of the Extruder’s Moving Parts

A High-Precision Five-Degree-Of-Freedom Measurement System Based on Laser Collimator and Interferometry Techniques

Study of the Method for Measuring Four-Degree-of-Freedom Geometric Errors of a Linear Stage

In situ monitoring for numerical controlled manufacturing of large conceptual prototype based on multi-view stitching fusion

Simultaneous Measuring Method Of Linear Guide Geometric Errors In Four-Degrees Of Freedom

A Novel Method To Enhance The Sensitivity For Two-Degrees-Of-Freedom Straightness Measurement

Method for enhancing stability in multi-beam microscopy

High-Accuracy Method for Measuring Two-Dimensional Angles of A Linear Guideway

Four Degree-Of-Freedom Geometric Error Measurement System with Common-Path Compensation for Laser Beam Drift

In situ monitoring of FDM machine condition via acoustic emission

Embedded displacement measuring device based on error separating technique of multi-circle overlapping three-probe method

Five-Degrees-Of-Freedom Measurement System Based on A Monolithic Prism and Phase-Sensitive Detection Technique

Online Quality Monitoring in Material Extrusion Additive Manufacturing Processes Based on Laser Scanning Technology

An optical method based auto-collimation for measuring five degrees of freedom error motions of rotary axis

Extrinsic calibration method for 3D scanning system with four coplanar laser profilers

On-Line Monitoring of the Axial Thermal Displacement of Machine Tools by Using a Laser Mouse Sensor

Interference-enhanced micro-vision-based single-shot imaging of five degrees-of-freedom error motions for ultra-precision rotary axes

A New 6-Degree-of-freedom Measurement Method of X-Y Stages Based on Additional Information

Monocular Vision-Based Decoupling Measurement Method for Multi-Degree-of-freedom Motion

An adaptive laser focus auto-positioning method for non-datum complex components based on 3D vision

Pose Calibration for 2D Laser Profiler Integrated in Five-Axis Machine Tools