Abstract:The inconvenient loading and unloading of a long and heavy drill pipe gives rise to the difficulty in measuring the contour parameters of its threads at both ends. To solve this problem, in this paper we take the SCK230 drill pipe thread-repairing machine tool as a carrier to design and achieve a fast and on-machine measuring system based on a laser probe. This system drives a laser displacement sensor to acquire the contour data of a certain axial section of the thread by using the servo function of a CNC machine tool. To correct the sensor's measurement errors caused by the measuring point inclination angle, an inclination error model is built to compensate data in real time. To better suppress random error interference and ensure real contour information, a new wavelet threshold function is proposed to process data through the wavelet threshold denoising. Discrete data after denoising is segmented according to the geometrical characteristics of the drill pipe thread, and the regression model of the contour data in each section is fitted by using the method of weighted total least squares (WTLS). Then, the thread parameters are calculated in real time to judge the processing quality. Inclination error experiments show that the proposed compensation model is accurate and effective, and it can improve the data acquisition accuracy of a sensor. Simulation results indicate that the improved threshold function is of better continuity and self-adaptability, which makes sure that denoising effects are guaranteed, and, meanwhile, the complete elimination of real data distorted in random errors is avoided. Additionally, NC50 thread-testing experiments show that the proposed on-machine measuring system can complete the measurement of a 25 mm thread in 7.8 s, with a measurement accuracy of ±8 μm and repeatability limit ≤ 4 μm (high repeatability), and hence the accuracy and efficiency of measurement are both improved.

On-Line Monitoring of the Axial Thermal Displacement of Machine Tools by Using a Laser Mouse Sensor

On-line linear guideway monitoring using laser mouse sensor

Research on high-speed and non-contact angle detection based on laser measurement

Axial Nanodisplacement Measurement Based on Astigmatism Effect of Crossed Cylindrical Lenses.

Research on the Real-time Measurement for the Thermal Distortion of the Spindle in Machine Tools by Using High Accuracy Displacement Sensor

Embedded displacement measuring device based on error separating technique of multi-circle overlapping three-probe method

Calibration of the laser displacement sensor and integration of on-site scanned points

Measurement of Thermal Deformation Influence on Machine Spindle Based on the Single-setup Tracking Interferometer

Measurement of the thermal elongation of high speed spindles in real time using a cat's eye reflector based optical sensor

On-machine Measurement of Thermal Influence of the Long-Span Crossbeam of Gantry Machine Tools Using a 3D Laser Profiler

Non-contact surface thermal deformation measurement based on chromatic confocal sensor

Thermal Offset Test and Analysis of NC Machine Tool's Spindle Axial

A Real-Time Tool Positioning Sensor for Machine-Tools

Design of Two-dimensional Displacement Measuring System for 125MN Extruder's Moving Part Based on OpenCV

A Fast and On-Machine Measuring System Using the Laser Displacement Sensor for the Contour Parameters of the Drill Pipe Thread

CCD Vision Based Surface Geometry Tracking for Real Time Navigation of CNC Machining

Real-Time Monitoring Method for Five-Degrees-of-Freedom of the Extruder’s Moving Parts

An autonomous multisensor in situ metrology system for enabling high dynamic range measurement of 3D surfaces on precision machine tools

A Dual-Beam Differential Method Based on Feedback Interferometry for Noncontact Measurement of Linear and Angular Displacement

Error identification and compensation for a laser displacement sensor based on on-machine measurement

Design and Implementation of High Precision Online Thickness Gauge by Laser Displacement Sensor