Abstract:LiMn 2 O 4 is considered to be a promising cathode material for lithium-ion batteries due to its decent energy density, low price and environmental benignity. However, the problems of Mn dissolution, migration and deposition during the cycle, seriously affect its lifespan, especially at high temperature. In this study, we developed a strategy by which we killed two birds with one stone. A low molecular weight polyacrylic acid (PAA) mixed with sodium carboxymethyl cellulose (CMC) is applied as binder and coating agent for cathode particles at the same time. The conventional and environmental unfriendly polyvinylidene difluoride (PVDF)-N-methylpyrrolidone (NMP) system is replaced by the cheap and green aqueous binder with improved adhesive effect. Furthermore, the binder-based surface coating layer not only alleviates the side reaction between the electrolyte and the cathode particles, but also chelates the dissolved Mn 2+ by the large amount of carboxyl groups in PAA molecules and so prevents the following migration and deposition of Mn 2+ . In the button half-cell with low molecular weight PAA based binder, the capacity retention reaches 94.1 % after 1000 cycles at room temperature and 92.0 % after 200 cycles at 60 degrees centigrade. Meanwhile, 18650-type cylindrical cells were prepared with this binder, which shows a great high temperature storage performance. After the cell was held at 60 degrees centigrade for 25 days at full charged state, the internal resistance increased by only 1.25mΩ, the voltage decreased by only 0.1 V, the residual capacity retention and recovery capacity retention reaches 85.6 % and 92.2 %. This work shows the great potential of the aqueous binder in dealing with the problem of Mn dissolution during the cycling of manganese-based cathode materials for lithium-ion batteries.

Enhanced High-Temperature Performances of Lifepo4 Cathode with Polyacrylic Acid As Binder

Cycle performance improvement of LiFePO4 cathode with polyacrylic acid as binder

An Aqueous Binder for High-Areal-Capacity Fe3O4-Based Anodes in Lithium-Ion Batteries

Improved Electrochemical Performance And Capacity Fading Mechanism Of Nano-Sized Limn0.9fe0.1po4 Cathode Modified By Polyacene Coating

Effect of poly (acrylic acid)/Poly (vinyl alcohol) blending binder on electrochemical performance for lithium iron phosphate cathodes

High-performance LiFePO 4 /C electrode with polytetrafluoroethylene as an aqueous-based binder

Enhanced Electrochemical Properties of LiFePO4 Cathode Using Waterborne Lithiated Ionomer Binder in Li-Ion Batteries with Low Amount

Lithium poly-acrylic acid as a fast Li+ transport media and a highly stable aqueous binder for Li3V2(PO4)3 cathode electrodes

Poly(amidoamine) dendrimer-induced 3D crosslinked network binder for LiFePO4 cathode: endowing battery with superior cycling stability

One-Step Solid-State Synthesis And High-Temperature Electrochemical Performance Of Carbon Coated Lifepo4 Cathode

Bifunctional low molecular weight polyacrylic acid as aqueous binder and coating agent enables high performance LiMn 2 O 4 cathode for lithium-ion batteries

Re‐Engineering Poly(Acrylic Acid) Binder toward Optimized Electrochemical Performance for Silicon Lithium‐Ion Batteries: Branching Architecture Leads to Balanced Properties of Polymeric Binders

Superior high-rate cycling performance of LiFePO4/C-PPy composite at 55°C

Functional Copolymer Binder for Nickel-Rich Cathode with Exceptional Cycling Stability at High Temperature Through Coordination Interaction

Stabilizing Zn2SiO4 Anode by a Lithium Polyacrylate Binder for Highly Reversible Lithium-Ion Storage.

High Adherent Polyacrylonitrile As a Potential Binder for High-Capacity Fe7S8 Cathode

Aliphatic Polycarbonate-Based Binders for High-Loading Cathodes by Solvent-Free Method Used in High Performance LiFePO4|Li Batteries

Suppressing Voltage Fading of Li‐Rich Oxide Cathode via Building a Well‐Protected and Partially‐Protonated Surface by Polyacrylic Acid Binder for Cycle‐Stable Li‐Ion Batteries

Trifunctional Electrode Additive for High Active Material Content and Volumetric Lithium‐Ion Electrode Densities

Poly(Acrylic Acid)‐Based Polymer Binders for High‐Performance Lithium‐Ion Batteries: From Structure to Properties

Li2ZrO3 Coated LiFe0.4Mn0.6PO4/C with Enhanced Cycling Performance at Elevated Temperature for Lithium-Ion Batteries